PartsTable
Technical Data Sheet
PartsTable / COMPONENT / SCA8460PT1
SCA8460PT1 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The CLAMP,LOOP is a the manufacturer industrial component. Key specifications include diameter: 0.406 INCHES NOMINAL IN, material: STEEL BAND, overall_width: 0.875 INCHES NOMINAL IN, special_features: DESIGNED TO HOLD 7/8 IN. MAX DIA MATERIAL IN, style_designator: SINGLE LOOP, tongue_hole_type: ROUND, UNTHREADED.

This product is currently in active production with full OEM support. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-186-3900, indicating validated use in U.S. government and defense logistics supply chains.

Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
SCA8460PT1
NSN: 5340-00-186-3900
FSC: 5340
CAGE: 80063 — US ARMY COMMUNICATIONS & ELECTRONICS MATERIEL READINESS COMMAND LOGISTICS ENGINEERING DIR (USA)
SPECIFICATIONS
diameter0.406 INCHES NOMINAL IN
materialSTEEL BAND
overall_width0.875 INCHES NOMINAL IN
special_featuresDESIGNED TO HOLD 7/8 IN. MAX DIA MATERIAL IN
style_designatorSINGLE LOOP
tongue_hole_typeROUND, UNTHREADED
surface_treatmentZINC BAND
material_thickness0.0359 INCHES NOMINAL IN
loop_inside_diameter0.875 INCHES NOMINAL IN
material_document_and_classificationQQ-S-636 FED SPEC SINGLE MATERIAL RESPONSE BAND
distance_from_loop_center_to_tongue_end1.500 INCHES NOMINAL IN
center_to_center_distance_between_loop_and_mounting_hole1.125 INCHES NOMINAL IN
NSN5340-00-186-3900
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: SCA8460PT1 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
DIAMETER: 0.406 INCHES NOMINAL IN
•
TONGUE HOLE TYPE: ROUND, UNTHREADED
•
SURFACE TREATMENT: ZINC BAND
•
LOOP INSIDE DIAMETER: 0.875 INCHES NOMINAL IN
•
MATERIAL: STEEL BAND
•
CENTER TO CENTER DISTANCE BETWEEN LOOP AND MOUNTING HOLE: 1.125 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS (FLIS)
DIAMETER0.406 INCHES NOMINAL IN
SPECIAL FEATURESDESIGNED TO HOLD 7/8 IN. MAX DIA MATERIAL IN
TONGUE HOLE TYPEROUND, UNTHREADED
SURFACE TREATMENTZINC BAND
LOOP INSIDE DIAMETER0.875 INCHES NOMINAL IN
MATERIALSTEEL BAND
MATERIALSTEEL BAND
CENTER TO CENTER DISTANCE BETWEEN LOOP AND MOUNTING HOLE1.125 INCHES NOMINAL IN
MATERIAL DOCUMENT AND CLASSIFICATIONQQ-S-636 FED SPEC SINGLE MATERIAL RESPONSE BAND
MATERIAL THICKNESS0.0359 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 6
B18.3Interchangeable
interchangeable cross-reference
interchangeable
705Interchangeable
interchangeable cross-reference
interchangeable
601Interchangeable
interchangeable cross-reference
interchangeable
105-004Interchangeable
interchangeable cross-reference
interchangeable
846-1Interchangeable
interchangeable cross-reference
interchangeable
846-01Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy SCA8460PT1?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is SCA8460PT1?
SCA8460PT1 is a CLAMP,LOOP.
What parts can replace SCA8460PT1?
There are 6 known substitutes for SCA8460PT1: B18.3, 705, 601 and 3 more. Substitute compatibility should be verified for your specific system.
What is the NSN for SCA8460PT1?
SCA8460PT1 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-186-3900. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — SCA8460PT1

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026