PartsTable
Technical Data Sheet
Download PDF

SC8-34 — SETSCREW

✓ Government record, cited
— · BOLT SCREW
PRODUCT OVERVIEW

SC8-34: SETSCREW.

The SETSCREW is a the manufacturer industrial component. Key specifications include material: STEEL CORROSION RESISTING OVERALL, head_style: HEADLESS (SETSCREW), point_style: HALF DOG, thread_class: 3A A, thread_length: 0.500 INCHES MINIMUM AND 0.516 INCHES MAXIMUM IN, fastener_length: 0.531 INCHES MINIMUM AND 0.547 INCHES MAXIMUM IN. This part is cataloged in the U.S.

Government catalog under NSN 5305-00-426-3172, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
SC8-34
NSN: 5305-00-426-3172
FSC: 5305 — Screws
CAGE: 29440 — W. M. BERG, INC. (USA)
SPECIFICATIONS
materialSTEEL CORROSION RESISTING OVERALL
head_styleHEADLESS (SETSCREW)
point_styleHALF DOG
thread_class3A A
thread_length0.500 INCHES MINIMUM AND 0.516 INCHES MAXIMUM IN
fastener_length0.531 INCHES MINIMUM AND 0.547 INCHES MAXIMUM IN
special_featuresNYLON POINT
thread_directionRIGHT-HAND
width_across_flats0.031 INCHES NOMINAL IN
internal_drive_styleHEXAGON
nominal_thread_diameter0.138 INCHES IN
thread_quantity_per_inch32
NSN5305-00-426-3172
COMPONENT DIAGRAM
BOLT / SCREW — THREAD VERIFICATION REQUIRED Hex HEAD LENGTH: — THREAD: — × — MATERIAL: — PN: SC8-34 · OEM ⚠ VERIFY BEFORE ORDERING Verify thread pitch before ordering — metric (M8×1.25) ≠ imperial (5/16-18). Wrong thread = wrong part. Grade/class stamped on bolt head determines tensile strength ✓ BROKER TIP Grade/class stamped on head determines tensile strength. Grade 8 > Grade 5 > Grade 2. Always confirm head marking matches specification requirement PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
WIDTH ACROSS FLATS: 0.031 INCHES NOMINAL IN
•
FASTENER LENGTH: 0.531 INCHES MINIMUM AND 0.547 INCHES MAXIMUM IN
•
THREAD LENGTH: 0.500 INCHES MINIMUM AND 0.516 INCHES MAXIMUM IN
•
NOMINAL THREAD DIAMETER: 0.138 INCHES IN
•
HEAD STYLE: HEADLESS (SETSCREW)
•
THREAD DIRECTION: RIGHT-HAND
•
POINT STYLE: HALF DOG
TECHNICAL CHARACTERISTICS
WIDTH ACROSS FLATS0.031 INCHES NOMINAL IN
FASTENER LENGTH0.531 INCHES MINIMUM AND 0.547 INCHES MAXIMUM IN
THREAD LENGTH0.500 INCHES MINIMUM AND 0.516 INCHES MAXIMUM IN
NOMINAL THREAD DIAMETER0.138 INCHES IN
HEAD STYLEHEADLESS (SETSCREW)
THREAD DIRECTIONRIGHT-HAND
POINT STYLEHALF DOG
SPECIAL FEATURESNYLON POINT
INTERNAL DRIVE STYLEHEXAGON
THREAD CLASS3A A
OTHER ITEMS IN FSC 5305 — Screws
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5305-00-000-0094 5305-00-000-1397 5305-00-000-2625 5305-00-000-3669 5305-00-000-3830 5305-00-000-3831
SUBSTITUTES & CROSS-REFERENCES 2
D-7045-3370-28Reference document
Same NSN cross-reference
Reference document — Advisory reference — outside the item-of-supply concept
CS27Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required
Ready to buy SC8-34?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is SC8-34?
SC8-34 is a SETSCREW.
What parts can replace SC8-34?
There are 2 known substitutes for SC8-34: D-7045-3370-28, CS27. Substitute compatibility should be verified for your specific system.
What is the NSN for SC8-34?
SC8-34 is cataloged in the U.S. Government catalog under NSN 5305-00-426-3172. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — SC8-34