PartsTable
Technical Data Sheet
PartsTable / COMPONENT / SC5340-0271-14
SC5340-0271-14 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The SLIDE,DRAWER,EXTENSION is a the manufacturer industrial component. Key specifications include width: 1.300 INCHES NOMINAL IN, height: 0.710 INCHES NOMINAL IN, material: STEEL COMP 1010 OVERALL, closed_length: 14.000 INCHES NOMINAL IN, load_capacity: 67.0 POUNDS NOMINAL LBS, extended_length: 24.000 INCHES NOMINAL IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-01-437-0027, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
SC5340-0271-14
NSN: 5340-01-437-0027
FSC: 5340
CAGE: 12115 — DRS ICAS, LLC (USA)
SPECIFICATIONS
width1.300 INCHES NOMINAL IN
height0.710 INCHES NOMINAL IN
materialSTEEL COMP 1010 OVERALL
closed_length14.000 INCHES NOMINAL IN
load_capacity67.0 POUNDS NOMINAL LBS
extended_length24.000 INCHES NOMINAL IN
mounting_methodUNTHREADED HOLE(S)
style_designator2 - MEMBER
surface_treatmentZINC OVERALL
side_for_which_designedLEFT HAND OR RIGHT HAND
mounting_facility_diameter0.177 INCHES NOMINAL IN
mounting_facility_quantity8
NSN5340-01-437-0027
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: SC5340-0271-14 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
SIDE FOR WHICH DESIGNED: LEFT HAND OR RIGHT HAND
•
MOUNTING METHOD: UNTHREADED HOLE(S)
•
SURFACE TREATMENT: ZINC OVERALL
•
MOUNTING FACILITY DIAMETER: 0.177 INCHES NOMINAL IN
•
MATERIAL: STEEL COMP 1010 OVERALL
•
STYLE DESIGNATOR: 2 - MEMBER
•
WIDTH: 1.300 INCHES NOMINAL IN
•
CLOSED LENGTH: 14.000 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS (FLIS)
SIDE FOR WHICH DESIGNEDLEFT HAND OR RIGHT HAND
MOUNTING METHODUNTHREADED HOLE(S)
SURFACE TREATMENTZINC OVERALL
MOUNTING FACILITY DIAMETER0.177 INCHES NOMINAL IN
MATERIALSTEEL COMP 1010 OVERALL
STYLE DESIGNATOR2 - MEMBER
WIDTH1.300 INCHES NOMINAL IN
CLOSED LENGTH14.000 INCHES NOMINAL IN
HEIGHT0.710 INCHES NOMINAL IN
LOAD CAPACITY67.0 POUNDS NOMINAL LBS
VERIFIED SUBSTITUTES & CROSS-REFERENCES 13
9320-14Interchangeable
interchangeable cross-reference
interchangeable
72202MInterchangeable
interchangeable cross-reference
interchangeable
632496-8Interchangeable
interchangeable cross-reference
interchangeable
T0477Interchangeable
interchangeable cross-reference
interchangeable
5192912Interchangeable
interchangeable cross-reference
interchangeable
32014Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy SC5340-0271-14?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is SC5340-0271-14?
SC5340-0271-14 is a SLIDE,DRAWER,EXTENSION.
What parts can replace SC5340-0271-14?
There are 13 known substitutes for SC5340-0271-14: 9320-14, 72202M, 632496-8 and 10 more. Substitute compatibility should be verified for your specific system.
What is the NSN for SC5340-0271-14?
SC5340-0271-14 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-01-437-0027. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — SC5340-0271-14

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026