PartsTable
Technical Data Sheet
Download PDF

SC3102-5-35 — SCREW,CLOSE TOLERANCE

✓ Government record, cited
— · BOLT SCREW
PRODUCT OVERVIEW

SC3102-5-35: SCREW,CLOSE TOLERANCE.

The SCREW,CLOSE TOLERANCE is a the manufacturer industrial component. Key specifications include material: TITANIUM ALLOY UNS R56400 OVERALL, head_style: FLAT COUNTERSUNK, grip_length: 2.178 INCHES MINIMUM AND 2.198 INCHES MAXIMUM IN, thread_class: 3A A, grip_diameter: 0.3115 INCHES MINIMUM AND 0.3120 INCHES MAXIMUM IN, head_diameter: 0.577 INCHES MINIMUM IN. This part is cataloged in the U.S.

Government catalog under NSN 5305-01-381-5753, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
SC3102-5-35
NSN: 5305-01-381-5753
FSC: 5305 — Screws
CAGE: 06950 — HOWMET GLOBAL FASTENING SYSTEMS INC (USA)
SPECIFICATIONS
materialTITANIUM ALLOY UNS R56400 OVERALL
head_styleFLAT COUNTERSUNK
grip_length2.178 INCHES MINIMUM AND 2.198 INCHES MAXIMUM IN
thread_class3A A
grip_diameter0.3115 INCHES MINIMUM AND 0.3120 INCHES MAXIMUM IN
head_diameter0.577 INCHES MINIMUM IN
thread_length0.469 INCHES NOMINAL IN
fastener_length2.642 INCHES MINIMUM AND 2.672 INCHES MAXIMUM IN
thread_directionRIGHT-HAND
countersink_angle99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM
internal_drive_styleOFFSET CRUCIFORM (TORQUE SET)
nominal_thread_diameter0.312 INCHES IN
NSN5305-01-381-5753
COMPONENT DIAGRAM
BOLT / SCREW — THREAD VERIFICATION REQUIRED Hex HEAD LENGTH: — THREAD: — × — MATERIAL: — PN: SC3102-5-35 · OEM ⚠ VERIFY BEFORE ORDERING Verify thread pitch before ordering — metric (M8×1.25) ≠ imperial (5/16-18). Wrong thread = wrong part. Grade/class stamped on bolt head determines tensile strength ✓ BROKER TIP Grade/class stamped on head determines tensile strength. Grade 8 > Grade 5 > Grade 2. Always confirm head marking matches specification requirement PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
FASTENER LENGTH: 2.642 INCHES MINIMUM AND 2.672 INCHES MAXIMUM IN
•
THREAD LENGTH: 0.469 INCHES NOMINAL IN
•
MATERIAL DOCUMENT AND CLASSIFICATION: AMS 4928 ASSN STD SINGLE MATERIAL RESPONSE OR AMS 4967 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
•
NOMINAL THREAD DIAMETER: 0.312 INCHES IN
•
HEAD STYLE: FLAT COUNTERSUNK
•
THREAD DIRECTION: RIGHT-HAND
•
GRIP LENGTH: 2.178 INCHES MINIMUM AND 2.198 INCHES MAXIMUM IN
•
GRIP DIAMETER: 0.3115 INCHES MINIMUM AND 0.3120 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS
FASTENER LENGTH2.642 INCHES MINIMUM AND 2.672 INCHES MAXIMUM IN
THREAD LENGTH0.469 INCHES NOMINAL IN
MATERIAL DOCUMENT AND CLASSIFICATIONAMS 4928 ASSN STD SINGLE MATERIAL RESPONSE OR AMS 4967 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
NOMINAL THREAD DIAMETER0.312 INCHES IN
HEAD STYLEFLAT COUNTERSUNK
THREAD DIRECTIONRIGHT-HAND
GRIP LENGTH2.178 INCHES MINIMUM AND 2.198 INCHES MAXIMUM IN
GRIP DIAMETER0.3115 INCHES MINIMUM AND 0.3120 INCHES MAXIMUM IN
MINIMUM TENSILE STRENGTH160000 POUNDS PER SQUARE INCH LBS
INTERNAL DRIVE STYLEOFFSET CRUCIFORM (TORQUE SET)
OTHER ITEMS IN FSC 5305 — Screws
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5305-00-001-5016 5305-00-001-9160 5305-00-001-9629 5305-00-001-9742 5305-00-001-9768 5305-00-003-4306 5305-00-003-6694 5305-00-003-6753
SUBSTITUTES & CROSS-REFERENCES 4
SLB146-5-35Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
03A174-5-35Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
T009-5-35Reference document
Same NSN cross-reference
Reference document — Secondary reference
AIC1652-5-35Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy SC3102-5-35?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is SC3102-5-35?
SC3102-5-35 is a SCREW,CLOSE TOLERANCE.
What parts can replace SC3102-5-35?
There are 4 known substitutes for SC3102-5-35: SLB146-5-35, 03A174-5-35, T009-5-35 and 1 more. Substitute compatibility should be verified for your specific system.
What is the NSN for SC3102-5-35?
SC3102-5-35 is cataloged in the U.S. Government catalog under NSN 5305-01-381-5753. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — SC3102-5-35

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.