PartsTable / COMPONENT / SC200940
SC200940
✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW
The GASKET is a the manufacturer industrial component. Key specifications include material: FIBER NONASBESTOS AND ASPHALT AND RUBBER BUTADIENE-ACRYLONITRILE CLASS NBR CORE, outside_diameter: 0.859 INCHES MINIMUM AND 0.875 INCHES MAXIMUM IN, special_features: AS DIFFERENTIATED BY FILLER OF NON-ASBESTOS MATERIAL, style_designator: CIRCULAR, aperture_diameter: 0.625 INCHES MINIMUM AND 0.641 INCHES MAXIMUM IN, maximum_pressure_rating: 200.0 POUNDS PER SQUARE INCH (PSI) LBS. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-01-354-2531, indicating validated use in U.S.
government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.
WHERE IT FITS
SC200940
NSN: 5330-01-354-2531 FSC: 5330 CAGE: 63728 — SEALCRAFT CORPORATION (USA)
SPECIFICATIONS
material FIBER NONASBESTOS AND ASPHALT AND RUBBER BUTADIENE-ACRYLONITRILE CLASS NBR CORE outside_diameter 0.859 INCHES MINIMUM AND 0.875 INCHES MAXIMUM IN special_features AS DIFFERENTIATED BY FILLER OF NON-ASBESTOS MATERIAL style_designator CIRCULAR aperture_diameter 0.625 INCHES MINIMUM AND 0.641 INCHES MAXIMUM IN maximum_pressure_rating 200.0 POUNDS PER SQUARE INCH (PSI) LBS cross-sectional_thickness 0.078 INCHES MINIMUM AND 0.110 INCHES MAXIMUM IN cross-sectional_shape_style METAL WITH SOFT FILLER environmental_attribute_code ASBESTOS ALTERNATIVE PRODUCTS criticality_code_justification MATT material_document_and_classification HH-G-101 FED SPEC SINGLE MATERIAL RESPONSE CASE NSN 5330-01-354-2531
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION
ID: —
CROSS-SECTION
CS: —
SPECIFICATION
Material: —
Durometer: —
Temp: —
PN: SC200940
MFR: OEM
⚠ VERIFY BEFORE ORDERING
Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade.
Chemical incompatibility causes swelling, brittleness, or rapid degradation
✓ BROKER TIP
Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure.
Standard durometer is 70A — verify if application requires different hardness
PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
• STYLE DESIGNATOR: CIRCULAR
• MATERIAL DOCUMENT AND CLASSIFICATION: HH-G-101 FED SPEC SINGLE MATERIAL RESPONSE CASE
• APERTURE DIAMETER: 0.625 INCHES MINIMUM AND 0.641 INCHES MAXIMUM IN
• CROSS-SECTIONAL SHAPE STYLE: METAL WITH SOFT FILLER
• CROSS-SECTIONAL THICKNESS: 0.078 INCHES MINIMUM AND 0.110 INCHES MAXIMUM IN
• CRITICALITY CODE JUSTIFICATION: MATT
TECHNICAL CHARACTERISTICS (FLIS)
STYLE DESIGNATOR CIRCULAR MATERIAL DOCUMENT AND CLASSIFICATION HH-G-101 FED SPEC SINGLE MATERIAL RESPONSE CASE APERTURE DIAMETER 0.625 INCHES MINIMUM AND 0.641 INCHES MAXIMUM IN MATERIAL COPPER CASE CROSS-SECTIONAL SHAPE STYLE METAL WITH SOFT FILLER MATERIAL DOCUMENT AND CLASSIFICATION HH-G-101,TYPE 3 FED SPEC ALL MATERIAL RESPONSES CORE CROSS-SECTIONAL THICKNESS 0.078 INCHES MINIMUM AND 0.110 INCHES MAXIMUM IN CRITICALITY CODE JUSTIFICATION MATT SPECIAL FEATURES AS DIFFERENTIATED BY FILLER OF NON-ASBESTOS MATERIAL OUTSIDE DIAMETER 0.859 INCHES MINIMUM AND 0.875 INCHES MAXIMUM IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 22
8065 Interchangeable interchangeable cross-reference
interchangeable
630-9 Interchangeable interchangeable cross-reference
interchangeable
G17006500 Interchangeable interchangeable cross-reference
interchangeable
MIL-B-18/31 Interchangeable interchangeable cross-reference
interchangeable
MIL-B-18 Interchangeable interchangeable cross-reference
interchangeable
601318 Interchangeable interchangeable cross-reference
interchangeable
LIFECYCLE
Status CANCELLED
Availability —
RoHS Compliant EAR99 Not HAZMAT
Ready to buy SC200940?
Compare prices from verified sellers on eBay
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is SC200940?
SC200940 is a GASKET.
What parts can replace SC200940?
There are 22 known substitutes for SC200940: 8065, 630-9, G17006500 and 19 more. Substitute compatibility should be verified for your specific system.
Is SC200940 still available?
SC200940 is currently cancelled.
Request a Quote — SC200940