PartsTable
Technical Data Sheet
Download PDF

SC1785R-4-10 — SCREW,MACHINE

✓ Government record, cited
— · BOLT SCREW
PRODUCT OVERVIEW

SC1785R-4-10: SCREW,MACHINE.

The SCREW,MACHINE is a the manufacturer industrial component. Key specifications include head_style: FLAT COUNTERSUNK, thread_class: 3A A, head_diameter: 0.461 INCHES MINIMUM AND 0.507 INCHES MAXIMUM IN, thread_length: 0.401 INCHES MINIMUM AND 0.451 INCHES MAXIMUM IN, screw_material: STEEL COMP E4340 OR STEEL COMP 6150 OR STEEL COMP 4140 OR STEEL COMP 8740 OR STEEL COMP 8735, fastener_length: 1.036 INCHES MINIMUM AND 1.066 INCHES MAXIMUM IN. This part is cataloged in the U.S.

Government catalog under NSN 5305-01-254-4356, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
SC1785R-4-10
NSN: 5305-01-254-4356
FSC: 5305 — Screws
CAGE: 06950 — HOWMET GLOBAL FASTENING SYSTEMS INC (USA)
SPECIFICATIONS
head_styleFLAT COUNTERSUNK
thread_class3A A
head_diameter0.461 INCHES MINIMUM AND 0.507 INCHES MAXIMUM IN
thread_length0.401 INCHES MINIMUM AND 0.451 INCHES MAXIMUM IN
screw_materialSTEEL COMP E4340 OR STEEL COMP 6150 OR STEEL COMP 4140 OR STEEL COMP 8740 OR STEEL COMP 8735
fastener_length1.036 INCHES MINIMUM AND 1.066 INCHES MAXIMUM IN
hardness_rating36.0 ROCKWELL C MINIMUM AND 40.0 ROCKWELL C MAXIMUM
special_featuresINTERNAL DRIVE RIBBED
thread_directionRIGHT-HAND
countersink_angle99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM
internal_drive_styleTORQUE SET
nominal_thread_diameter0.250 INCHES IN
NSN5305-01-254-4356
COMPONENT DIAGRAM
BOLT / SCREW — THREAD VERIFICATION REQUIRED Hex HEAD LENGTH: — THREAD: — × — MATERIAL: — PN: SC1785R-4-10 · OEM ⚠ VERIFY BEFORE ORDERING Verify thread pitch before ordering — metric (M8×1.25) ≠ imperial (5/16-18). Wrong thread = wrong part. Grade/class stamped on bolt head determines tensile strength ✓ BROKER TIP Grade/class stamped on head determines tensile strength. Grade 8 > Grade 5 > Grade 2. Always confirm head marking matches specification requirement PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
SCREW SURFACE TREATMENT: CADMIUM AND CHROMATE
•
FASTENER LENGTH: 1.036 INCHES MINIMUM AND 1.066 INCHES MAXIMUM IN
•
THREAD LENGTH: 0.401 INCHES MINIMUM AND 0.451 INCHES MAXIMUM IN
•
HARDNESS RATING: 36.0 ROCKWELL C MINIMUM AND 40.0 ROCKWELL C MAXIMUM
•
NOMINAL THREAD DIAMETER: 0.250 INCHES IN
•
HEAD STYLE: FLAT COUNTERSUNK
•
THREAD DIRECTION: RIGHT-HAND
•
SCREW MATERIAL: STEEL COMP E4340 OR STEEL COMP 6150 OR STEEL COMP 4140 OR STEEL COMP 8740 OR STEEL COMP 8735
TECHNICAL CHARACTERISTICS
SCREW SURFACE TREATMENTCADMIUM AND CHROMATE
FASTENER LENGTH1.036 INCHES MINIMUM AND 1.066 INCHES MAXIMUM IN
THREAD LENGTH0.401 INCHES MINIMUM AND 0.451 INCHES MAXIMUM IN
HARDNESS RATING36.0 ROCKWELL C MINIMUM AND 40.0 ROCKWELL C MAXIMUM
NOMINAL THREAD DIAMETER0.250 INCHES IN
HEAD STYLEFLAT COUNTERSUNK
THREAD DIRECTIONRIGHT-HAND
SCREW MATERIALSTEEL COMP E4340 OR STEEL COMP 6150 OR STEEL COMP 4140 OR STEEL COMP 8740 OR STEEL COMP 8735
SPECIAL FEATURESINTERNAL DRIVE RIBBED
MINIMUM TENSILE STRENGTH160000 POUNDS PER SQUARE INCH LBS
OTHER ITEMS IN FSC 5305 — Screws
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5305-00-001-5016 5305-00-001-9160 5305-00-001-9629 5305-00-001-9742 5305-00-001-9768 5305-00-003-4306 5305-00-003-6694 5305-00-003-6753
SUBSTITUTES & CROSS-REFERENCES 7
FIT111-0032-0410Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
AIC4038-4-10Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
MA2LE132R4-2410Reference document
Same NSN cross-reference
Reference document — Secondary reference
HR132-4R2410Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
LE111-0032-2410Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
SII-1087-0410Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required
Ready to buy SC1785R-4-10?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is SC1785R-4-10?
SC1785R-4-10 is a SCREW,MACHINE.
What parts can replace SC1785R-4-10?
There are 7 known substitutes for SC1785R-4-10: FIT111-0032-0410, AIC4038-4-10, MA2LE132R4-2410 and 4 more. Substitute compatibility should be verified for your specific system.
What is the NSN for SC1785R-4-10?
SC1785R-4-10 is cataloged in the U.S. Government catalog under NSN 5305-01-254-4356. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — SC1785R-4-10

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.