PartsTable
Technical Data Sheet
Download PDF

SC1711C3-5 — SCREW,MACHINE

✓ Government record, cited
— · BOLT SCREW
PRODUCT OVERVIEW

SC1711C3-5: SCREW,MACHINE.

The SCREW,MACHINE is a the manufacturer industrial component. Key specifications include head_style: FLAT COUNTERSUNK, thread_class: 3A A, head_diameter: 0.296 INCHES MINIMUM AND 0.301 INCHES MAXIMUM IN, thread_length: 0.343 INCHES MINIMUM IN, screw_material: STEEL, fastener_length: 0.645 INCHES MINIMUM AND 0.665 INCHES MAXIMUM IN. This part is cataloged in the U.S.

Government catalog under NSN 5305-00-508-7710, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
SC1711C3-5
NSN: 5305-00-508-7710
FSC: 5305 — Screws
CAGE: 06950 — HOWMET GLOBAL FASTENING SYSTEMS INC (USA)
SPECIFICATIONS
head_styleFLAT COUNTERSUNK
thread_class3A A
head_diameter0.296 INCHES MINIMUM AND 0.301 INCHES MAXIMUM IN
thread_length0.343 INCHES MINIMUM IN
screw_materialSTEEL
fastener_length0.645 INCHES MINIMUM AND 0.665 INCHES MAXIMUM IN
thread_directionRIGHT-HAND
countersink_angle100.0 DEGREES NOMINAL
internal_drive_styleTORQUE SET
nominal_thread_diameter0.190 INCHES IN
screw_surface_treatmentPASSIVATE
thread_quantity_per_inch32
NSN5305-00-508-7710
COMPONENT DIAGRAM
BOLT / SCREW — THREAD VERIFICATION REQUIRED Hex HEAD LENGTH: — THREAD: — × — MATERIAL: — PN: SC1711C3-5 · OEM ⚠ VERIFY BEFORE ORDERING Verify thread pitch before ordering — metric (M8×1.25) ≠ imperial (5/16-18). Wrong thread = wrong part. Grade/class stamped on bolt head determines tensile strength ✓ BROKER TIP Grade/class stamped on head determines tensile strength. Grade 8 > Grade 5 > Grade 2. Always confirm head marking matches specification requirement PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
SCREW SURFACE TREATMENT: PASSIVATE
•
FASTENER LENGTH: 0.645 INCHES MINIMUM AND 0.665 INCHES MAXIMUM IN
•
THREAD LENGTH: 0.343 INCHES MINIMUM IN
•
NOMINAL THREAD DIAMETER: 0.190 INCHES IN
•
HEAD STYLE: FLAT COUNTERSUNK
•
THREAD DIRECTION: RIGHT-HAND
•
SCREW MATERIAL: STEEL
•
INTERNAL DRIVE STYLE: TORQUE SET
TECHNICAL CHARACTERISTICS
SCREW SURFACE TREATMENTPASSIVATE
FASTENER LENGTH0.645 INCHES MINIMUM AND 0.665 INCHES MAXIMUM IN
THREAD LENGTH0.343 INCHES MINIMUM IN
NOMINAL THREAD DIAMETER0.190 INCHES IN
HEAD STYLEFLAT COUNTERSUNK
THREAD DIRECTIONRIGHT-HAND
SCREW MATERIALSTEEL
INTERNAL DRIVE STYLETORQUE SET
COUNTERSINK ANGLE100.0 DEGREES NOMINAL
THREAD CLASS3A A
OTHER ITEMS IN FSC 5305 — Screws
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5305-00-000-0094 5305-00-000-1397 5305-00-000-2625 5305-00-000-3669 5305-00-000-3830 5305-00-000-3831
SUBSTITUTES & CROSS-REFERENCES 3
202-15523C3-5Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
AIC84C3-5Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
BA45095C3-5Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy SC1711C3-5?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is SC1711C3-5?
SC1711C3-5 is a SCREW,MACHINE.
What parts can replace SC1711C3-5?
There are 3 known substitutes for SC1711C3-5: 202-15523C3-5, AIC84C3-5, BA45095C3-5. Substitute compatibility should be verified for your specific system.
What is the NSN for SC1711C3-5?
SC1711C3-5 is cataloged in the U.S. Government catalog under NSN 5305-00-508-7710. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — SC1711C3-5