PartsTable
Technical Data Sheet
Download PDF

SC1078 — BOLT,BARREL

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

SC1078: BOLT,BARREL.

The BOLT,BARREL is a the manufacturer industrial component. Key specifications include width: 1.000 INCHES NOMINAL PLATE IN, length: 2.500 INCHES NOMINAL PLATE IN, diameter: 0.250 INCHES NOMINAL BAR IN, strike_type: RIM, special_features: WEIGHT:1.500 LBS PER DOZEN;BAR O/A LG:2.500 IN.NOM;MATL:STEEL; LBS, features_provided: SCREW. This part is cataloged in the U.S.

Government catalog under NSN 5340-00-240-2302, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
SC1078
NSN: 5340-00-240-2302
FSC: 5340 — Hardware, Commercial
CAGE: 57068 — STANLEY WORKS THE (USA)
SPECIFICATIONS
width1.000 INCHES NOMINAL PLATE IN
length2.500 INCHES NOMINAL PLATE IN
diameter0.250 INCHES NOMINAL BAR IN
strike_typeRIM
strike_quantity1
special_featuresWEIGHT:1.500 LBS PER DOZEN;BAR O/A LG:2.500 IN.NOM;MATL:STEEL; LBS
features_providedSCREW
surface_treatmentENAMEL BAKED PLATE
NSN5340-00-240-2302
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: SC1078 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
LENGTH: 2.500 INCHES NOMINAL PLATE IN
•
DIAMETER: 0.250 INCHES NOMINAL BAR IN
•
STRIKE QUANTITY: 1
•
FEATURES PROVIDED: SCREW
•
STRIKE TYPE: RIM
•
SURFACE TREATMENT: ZINC BAR
TECHNICAL CHARACTERISTICS
LENGTH2.500 INCHES NOMINAL PLATE IN
DIAMETER0.250 INCHES NOMINAL BAR IN
STRIKE QUANTITY1
FEATURES PROVIDEDSCREW
STRIKE TYPERIM
SPECIAL FEATURESWEIGHT:1.500 LBS PER DOZEN;BAR O/A LG:2.500 IN.NOM;MATL:STEEL; LBS
SURFACE TREATMENTZINC BAR
SURFACE TREATMENTENAMEL BAKED PLATE
WIDTH1.000 INCHES NOMINAL PLATE IN
SUBSTITUTES & CROSS-REFERENCES 3
22 5440Reference document
Same NSN cross-reference
Reference document — Design control — primary reference
02502-1DReference document
Same NSN cross-reference
Reference document — Secondary reference
J0920Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Terminal item — no further procurement; issued until stock is exhaustedNo demilitarization required
Ready to buy SC1078?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is SC1078?
SC1078 is a BOLT,BARREL.
What parts can replace SC1078?
There are 3 known substitutes for SC1078: 22 5440, 02502-1D, J0920. Substitute compatibility should be verified for your specific system.
What is the NSN for SC1078?
SC1078 is cataloged in the U.S. Government catalog under NSN 5340-00-240-2302. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — SC1078

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.