PartsTable
Technical Data Sheet
PartsTable / COMPONENT / SC1026011
SC1026011 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The RING,WIPER is a the manufacturer industrial component. Key specifications include material: UNABLE TO DECODE, ring_style: CONCENTRIC, inside_diameter: 4.492 INCHES NOMINAL IN, outside_diameter: 4.907 INCHES NOMINAL IN, material_thickness: 0.188 INCHES NOMINAL IN, outer_edge_thickness: 0.031 INCHES NOMINAL IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-606-4478, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
SC1026011
NSN: 5330-00-606-4478
FSC: 5330
CAGE: 97816 — SEREN MACHINE PRODUCTS CORP SUB OF HARNISCHFEGER CORP (USA)
SPECIFICATIONS
materialUNABLE TO DECODE
ring_styleCONCENTRIC
inside_diameter4.492 INCHES NOMINAL IN
outside_diameter4.907 INCHES NOMINAL IN
material_thickness0.188 INCHES NOMINAL IN
outer_edge_thickness0.031 INCHES NOMINAL IN
cross-sectional_shape_styleOUTSIDE GROOVED AND BEVELED, STRAIGHT FACE
NSN5330-00-606-4478
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: SC1026011 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
RING STYLE: CONCENTRIC
•
OUTER EDGE THICKNESS: 0.031 INCHES NOMINAL IN
•
INSIDE DIAMETER: 4.492 INCHES NOMINAL IN
•
CROSS-SECTIONAL SHAPE STYLE: OUTSIDE GROOVED AND BEVELED, STRAIGHT FACE
•
MATERIAL THICKNESS: 0.188 INCHES NOMINAL IN
•
MATERIAL: UNABLE TO DECODE
•
OUTSIDE DIAMETER: 4.907 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS (FLIS)
RING STYLECONCENTRIC
OUTER EDGE THICKNESS0.031 INCHES NOMINAL IN
INSIDE DIAMETER4.492 INCHES NOMINAL IN
CROSS-SECTIONAL SHAPE STYLEOUTSIDE GROOVED AND BEVELED, STRAIGHT FACE
MATERIAL THICKNESS0.188 INCHES NOMINAL IN
MATERIALUNABLE TO DECODE
OUTSIDE DIAMETER4.907 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 18
70-0905-355Interchangeable
interchangeable cross-reference
interchangeable
6380Interchangeable
interchangeable cross-reference
interchangeable
41Interchangeable
interchangeable cross-reference
interchangeable
A-41Interchangeable
interchangeable cross-reference
interchangeable
10125216Interchangeable
interchangeable cross-reference
interchangeable
D2-8632PCInterchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy SC1026011?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is SC1026011?
SC1026011 is a RING,WIPER.
What parts can replace SC1026011?
There are 18 known substitutes for SC1026011: 70-0905-355, 6380, 41 and 15 more. Substitute compatibility should be verified for your specific system.
What is the NSN for SC1026011?
SC1026011 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-606-4478. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — SC1026011

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026