Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW
The GASKET is a the manufacturer industrial component. Key specifications include material: PAPER AND RESIN NATURAL OR RESIN SYNTHETIC OVERALL, hole_diameter: 0.152 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN, overall_width: 4.900 INCHES NOMINAL IN, aperture_width: 3.900 INCHES NOMINAL IN, overall_length: 4.900 INCHES NOMINAL IN, aperture_length: 3.900 INCHES NOMINAL IN. This product is currently in active production with full OEM support.
This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-292-2156, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.
Verify compatibility with your specific system configuration before ordering.
WHERE IT FITS
SC-C-53365
NSN:5330-00-292-2156 FSC:5330 CAGE:80063 — US ARMY COMMUNICATIONS & ELECTRONICS MATERIEL READINESS COMMAND LOGISTICS ENGINEERING DIR (USA)
SPECIFICATIONS
material
PAPER AND RESIN NATURAL OR RESIN SYNTHETIC OVERALL
hole_diameter
0.152 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN
overall_width
4.900 INCHES NOMINAL IN
aperture_width
3.900 INCHES NOMINAL IN
overall_length
4.900 INCHES NOMINAL IN
aperture_length
3.900 INCHES NOMINAL IN
special_features
WITH EIGHT POSITIONING SLOTS
style_designator
NON-CIRCULAR
bolt_hole_quantity
4
outside_corner_radius
0.188 INCHES NOMINAL IN
cross-sectional_thickness
0.016 INCHES NOMINAL IN
cross-sectional_shape_style
SOLID SINGLE OR COMPOSITION
NSN
5330-00-292-2156
COMPONENT DIAGRAM
KEY FEATURES
•
OUTSIDE CORNER RADIUS: 0.188 INCHES NOMINAL IN
•
APERTURE LENGTH: 3.900 INCHES NOMINAL IN
•
HOLE DIAMETER: 0.152 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN
•
STYLE DESIGNATOR: NON-CIRCULAR
•
MATERIAL DOCUMENT AND CLASSIFICATION: MIL-G-12803 F393144-5 MIL SPEC SINGLE MATERIAL RESPONSE OVERALL
•
OUTSIDE EDGE TO BOLT HOLE CENTER DISTANCE ALONG LENGTH: 0.184 INCHES NOMINAL IN
•
OUTSIDE EDGE TO BOLT HOLE CENTER DISTANCE ALONG WIDTH: 0.184 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS (FLIS)
OUTSIDE CORNER RADIUS
0.188 INCHES NOMINAL IN
SPECIAL FEATURES
WITH EIGHT POSITIONING SLOTS
APERTURE LENGTH
3.900 INCHES NOMINAL IN
HOLE DIAMETER
0.152 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN
STYLE DESIGNATOR
NON-CIRCULAR
MATERIAL DOCUMENT AND CLASSIFICATION
MIL-G-12803 F393144-5 MIL SPEC SINGLE MATERIAL RESPONSE OVERALL
OUTSIDE EDGE TO BOLT HOLE CENTER DISTANCE ALONG LENGTH
0.184 INCHES NOMINAL IN
OUTSIDE EDGE TO BOLT HOLE CENTER DISTANCE ALONG WIDTH
0.184 INCHES NOMINAL IN
CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG WIDTH
4.531 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is SC-C-53365?
SC-C-53365 is a GASKET.
What parts can replace SC-C-53365?
There are 13 known substitutes for SC-C-53365: PURCHASEDESCRIPTI0N33-7, CQ3, 603-011 and 10 more. Substitute compatibility should be verified for your specific system.
What is the NSN for SC-C-53365?
SC-C-53365 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-292-2156. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.