PartsTable
Technical Data Sheet
SC-8 ✓ Verified by PartsTable
· MRO · MRO_GENERAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The SEMICONDUCTOR DEVICE,DIODE is a the manufacturer industrial component. Key specifications include width: 8.000 INCHES NOMINAL IN, height: 5.750 INCHES NOMINAL IN, length: 9.438 INCHES NOMINAL IN, material: CERAMIC OR FIBER CASE, tire_type: PNEUMATIC, body_style: TUBE TYPE. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-034-7952, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MRO MRO_GENERAL SC-8
NSN: 5340-00-034-7952
FSC: 5340
CAGE: 60995 — TUBING SEAL CAP DIV OF VSI CORP SUB OF FAIRCHILD INDUSTRIES INC (USA)
SPECIFICATIONS
width8.000 INCHES NOMINAL IN
height5.750 INCHES NOMINAL IN
length9.438 INCHES NOMINAL IN
materialCERAMIC OR FIBER CASE
tire_typePNEUMATIC
body_styleTUBE TYPE
design_typeFIXED
coupler_typeAUTOMATIC
drawbar_typeEYE
thread_class3B
steering_typeFIFTH WHEEL
overall_length1.312 INCHES NOMINAL IN
NSN5340-00-034-7952
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: SC-8 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
OVERALL DIAMETER: 0.875 INCHES NOMINAL IN
MATERIAL: ALUMINUM
THREAD SIZE AND SERIES/TYPE DESIGNATOR: 3/4-16 UNF
DEPARTURE FROM CITED DOCUMENT: AS MODIFIED BY SURFACE TREATMENT
THREAD CLASS: 3B
ROUND CAP OUTSIDE SURFACE CONDITION: SERRATED
DESIGN TYPE: THREADED
NONDEFINITIVE SPEC/STD DATA: 2 TYPE AND 8 SIZE
TECHNICAL CHARACTERISTICS (FLIS)
OVERALL DIAMETER0.875 INCHES NOMINAL IN
MATERIALALUMINUM
THREAD SIZE AND SERIES/TYPE DESIGNATOR3/4-16 UNF
DEPARTURE FROM CITED DOCUMENTAS MODIFIED BY SURFACE TREATMENT
THREAD CLASS3B
ROUND CAP OUTSIDE SURFACE CONDITIONSERRATED
DESIGN TYPETHREADED
NONDEFINITIVE SPEC/STD DATA2 TYPE AND 8 SIZE
VERIFIED SUBSTITUTES & CROSS-REFERENCES 11
A145HUpgraded Successor
successor cross-reference
successor
145HUpgraded Successor
successor cross-reference
successor
A1145HUpgraded Successor
successor cross-reference
successor
33305Interchangeable
interchangeable cross-reference
interchangeable
N1T-MODELHWCInterchangeable
interchangeable cross-reference
interchangeable
SC-8Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy SC-8?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is SC-8?
SC-8 is a SEMICONDUCTOR DEVICE,DIODE. It is classified as a MRO (MRO_GENERAL).
What parts can replace SC-8?
There are 11 known substitutes for SC-8: A145H, 145H, A1145H and 8 more. Substitute compatibility should be verified for your specific system.
What is the NSN for SC-8?
SC-8 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-034-7952. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — SC-8