PartsTable
Technical Data Sheet
Download PDF

SB83314 — STRIKE,CATCH

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

SB83314: STRIKE,CATCH.

The STRIKE,CATCH is a the manufacturer industrial component. Key specifications include height: 0.313 INCHES NOMINAL IN, material: UNABLE TO DECODE, tongue_width: 0.531 INCHES NOMINAL IN, overall_width: 0.628 INCHES NOMINAL IN, tongue_length: 0.252 INCHES NOMINAL IN, overall_length: 0.625 INCHES NOMINAL IN. This part is cataloged in the U.S.

Government catalog under NSN 5340-00-839-1630, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
SB83314
NSN: 5340-00-839-1630
FSC: 5340 — Hardware, Commercial
CAGE: 1RRL5 — NIELSEN HARDWARE CORPORATION (USA)
SPECIFICATIONS
height0.313 INCHES NOMINAL IN
materialUNABLE TO DECODE
tongue_width0.531 INCHES NOMINAL IN
overall_width0.628 INCHES NOMINAL IN
tongue_length0.252 INCHES NOMINAL IN
overall_length0.625 INCHES NOMINAL IN
material_thickness0.065 INCHES NOMINAL IN
first_surface_hole_size0.144 INCHES NOMINAL IN
first_surface_hole_quantity2
NSN5340-00-839-1630
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: SB83314 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
TONGUE WIDTH: 0.531 INCHES NOMINAL IN
•
FIRST SURFACE HOLE SIZE: 0.144 INCHES NOMINAL IN
•
MATERIAL THICKNESS: 0.065 INCHES NOMINAL IN
•
HEIGHT: 0.313 INCHES NOMINAL IN
•
MATERIAL: UNABLE TO DECODE
•
TONGUE LENGTH: 0.252 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS
TONGUE WIDTH0.531 INCHES NOMINAL IN
OVERALL LENGTH0.625 INCHES NOMINAL IN
OVERALL WIDTH0.628 INCHES NOMINAL IN
FIRST SURFACE HOLE SIZE0.144 INCHES NOMINAL IN
MATERIAL THICKNESS0.065 INCHES NOMINAL IN
HEIGHT0.313 INCHES NOMINAL IN
MATERIALUNABLE TO DECODE
TONGUE LENGTH0.252 INCHES NOMINAL IN
FIRST SURFACE HOLE QUANTITY2
OTHER ITEMS IN FSC 5340 — Hardware, Commercial
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5340-00-000-0068 5340-00-000-0132 5340-00-000-8150 5340-00-001-1251 5340-00-001-1264 5340-00-001-1265 5340-00-001-1266 5340-00-001-1275
SUBSTITUTES & CROSS-REFERENCES 2
373MS065P001Reference document
Same NSN cross-reference
Reference document — Secondary reference
821998-00Reference document
Same NSN cross-reference
Reference document — Advisory reference — outside the item-of-supply concept
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Terminal item — no further procurement; issued until stock is exhaustedNo demilitarization required
Ready to buy SB83314?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is SB83314?
SB83314 is a STRIKE,CATCH.
What parts can replace SB83314?
There are 2 known substitutes for SB83314: 373MS065P001, 821998-00. Substitute compatibility should be verified for your specific system.
What is the NSN for SB83314?
SB83314 is cataloged in the U.S. Government catalog under NSN 5340-00-839-1630. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — SB83314