PartsTable
Technical Data Sheet
Download PDF

SB6750-3 — GASKET

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

SB6750-3: GASKET.

The GASKET is a the manufacturer industrial component. Key specifications include hole_diameter: 0.500 INCHES NOMINAL ALL HOLES IN, end_item_identification: BCMS FURNANCE CAMER, cross-sectional_thickness: 0.13 INCHES NOMINAL IN, cross_section_inside_diameter: 3.00 INCHES NOMINAL IN, cross_section_outside_diameter: 5.00 INCHES NOMINAL IN, part_name_assigned_by_controlling_agency: GRAFOIL GHL, GASKET. This part is cataloged in the U.S.

Government catalog under NSN 5330-01-721-7078, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
SB6750-3
NSN: 5330-01-721-7078
FSC: 5330 — Packing and Gasket Materials
CAGE: 5PTT9 — J. M. CANTY, INC. DBA JM CANTY INC (USA)
SPECIFICATIONS
hole_diameter0.500 INCHES NOMINAL ALL HOLES IN
bolt_hole_quantity4
end_item_identificationBCMS FURNANCE CAMER
cross-sectional_thickness0.13 INCHES NOMINAL IN
cross_section_inside_diameter3.00 INCHES NOMINAL IN
cross_section_outside_diameter5.00 INCHES NOMINAL IN
part_name_assigned_by_controlling_agencyGRAFOIL GHL, GASKET
NSN5330-01-721-7078
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: SB6750-3 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CROSS-SECTIONAL THICKNESS: 0.13 INCHES NOMINAL IN
•
CROSS SECTION INSIDE DIAMETER: 3.00 INCHES NOMINAL IN
•
BOLT HOLE QUANTITY: 4
•
CROSS SECTION OUTSIDE DIAMETER: 5.00 INCHES NOMINAL IN
•
HOLE DIAMETER: 0.500 INCHES NOMINAL ALL HOLES IN
TECHNICAL CHARACTERISTICS
CROSS-SECTIONAL THICKNESS0.13 INCHES NOMINAL IN
CROSS SECTION INSIDE DIAMETER3.00 INCHES NOMINAL IN
BOLT HOLE QUANTITY4
CROSS SECTION OUTSIDE DIAMETER5.00 INCHES NOMINAL IN
PART NAME ASSIGNED BY CONTROLLING AGENCYGRAFOIL GHL, GASKET
END ITEM IDENTIFICATIONBCMS FURNANCE CAMER
HOLE DIAMETER0.500 INCHES NOMINAL ALL HOLES IN
OTHER ITEMS IN FSC 5330 — Packing and Gasket Materials
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5330-00-000-0085 5330-00-000-0167 5330-00-000-5275 5330-00-001-1260 5330-00-001-1833 5330-00-001-1844 5330-00-001-1845 5330-00-001-1846
SUBSTITUTES & CROSS-REFERENCES 1
CANTY QUOTE HTEMPReference document
Same NSN cross-reference
Reference document — Drawing number reference only
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy SB6750-3?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is SB6750-3?
SB6750-3 is a GASKET.
What parts can replace SB6750-3?
There is 1 known substitute for SB6750-3: CANTY QUOTE HTEMP. Substitute compatibility should be verified for your specific system.
What is the NSN for SB6750-3?
SB6750-3 is cataloged in the U.S. Government catalog under NSN 5330-01-721-7078. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — SB6750-3