PartsTable
Technical Data Sheet
Download PDF

SB5203-104 — RING,BEARING,INNER

✓ Government record, cited
— · TAPERED BEARING
PRODUCT OVERVIEW

SB5203-104: RING,BEARING,INNER.

The RING,BEARING,INNER is a the manufacturer industrial component. Key specifications include material: STEEL INNER RING, bore_shape: STRAIGHT, bore_diameter: 2.7120 INCHES MINIMUM AND 2.7130 INCHES MAXIMUM IN, overall_width: 3.0000 INCHES NOMINAL IN, surface_finish: GROUND, style_designator: SOLID INNER RACE, JOURNAL AND NEEDLE. This part is cataloged in the U.S.

Government catalog under NSN 3110-01-114-1001, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
SB5203-104
NSN: 3110-01-114-1001
FSC: 3110 — Bearings, Antifriction, Unmounted
CAGE: 15860 — NEW HAMPSHIRE BALL BEARINGS INC DIV ASTRO DIVISION (USA)
SPECIFICATIONS
materialSTEEL INNER RING
bore_shapeSTRAIGHT
bore_diameter2.7120 INCHES MINIMUM AND 2.7130 INCHES MAXIMUM IN
overall_width3.0000 INCHES NOMINAL IN
surface_finishGROUND
special_featuresELECTROLIZE CHROME PLATE PER FED CODE NO. 08678 OD ONLY,ALT ARMALLOY OD,PRECIPITATION HEAT TO 1050 CONDITION PER MIL-H-6875 AT 1050 MIN AND PLUS 10 DEG F FOR 4 HOURS DEGF
style_designatorSOLID INNER RACE, JOURNAL AND NEEDLE
overall_outside_diameter2.9090 INCHES MINIMUM AND 2.9100 INCHES MAXIMUM IN
material_document_and_classificationAMS 5629,81343 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
NSN3110-01-114-1001
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: SB5203-104 · OEM ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
SURFACE FINISH: GROUND
•
STYLE DESIGNATOR: SOLID INNER RACE, JOURNAL AND NEEDLE
•
MATERIAL DOCUMENT AND CLASSIFICATION: AMS 5629,81343 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
•
OVERALL OUTSIDE DIAMETER: 2.9090 INCHES MINIMUM AND 2.9100 INCHES MAXIMUM IN
•
BORE SHAPE: STRAIGHT
•
BORE DIAMETER: 2.7120 INCHES MINIMUM AND 2.7130 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS
SURFACE FINISHGROUND
STYLE DESIGNATORSOLID INNER RACE, JOURNAL AND NEEDLE
MATERIAL DOCUMENT AND CLASSIFICATIONAMS 5629,81343 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
OVERALL WIDTH3.0000 INCHES NOMINAL IN
OVERALL OUTSIDE DIAMETER2.9090 INCHES MINIMUM AND 2.9100 INCHES MAXIMUM IN
BORE SHAPESTRAIGHT
SPECIAL FEATURESELECTROLIZE CHROME PLATE PER FED CODE NO. 08678 OD ONLY,ALT ARMALLOY OD,PRECIPITATION HEAT TO 1050 CONDITION PER MIL-H-6875 AT 1050 MIN AND PLUS 10 DEG F FOR 4 HOURS DEGF
BORE DIAMETER2.7120 INCHES MINIMUM AND 2.7130 INCHES MAXIMUM IN
MATERIALSTEEL INNER RING
SUBSTITUTES & CROSS-REFERENCES 3
KMS1031Reference document
Same NSN cross-reference
Reference document — Secondary reference
B43-10Reference document
Same NSN cross-reference
Reference document — Secondary reference
BJ87-3Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required
Ready to buy SB5203-104?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is SB5203-104?
SB5203-104 is a RING,BEARING,INNER.
What parts can replace SB5203-104?
There are 3 known substitutes for SB5203-104: KMS1031, B43-10, BJ87-3. Substitute compatibility should be verified for your specific system.
What is the NSN for SB5203-104?
SB5203-104 is cataloged in the U.S. Government catalog under NSN 3110-01-114-1001. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — SB5203-104