PartsTable
Technical Data Sheet
Download PDF

SB496 — NUT,PLAIN,HEXAGON

✓ Government record, cited
— · NUT WASHER
PRODUCT OVERVIEW

SB496: NUT,PLAIN,HEXAGON.

The NUT,PLAIN,HEXAGON is a the manufacturer industrial component. Key specifications include material: STEEL COMP 303 OR STEEL COMP 303SE OR STEEL COMP 303 PLUS X OVERALL, nut_style: HEXAGON, nut_height: 0.077 INCHES MINIMUM AND 0.087 INCHES MAXIMUM IN, thread_class: 2B, thread_series: UNF, thread_direction: RIGHT-HAND. This part is cataloged in the U.S.

Government catalog under NSN 5310-00-755-7436, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
SB496
NSN: 5310-00-755-7436
NIINs: 007557436, 008391631
FSC: 5310 — Nuts and Washers
CAGE: 96429 — WESTPORT INTERNATIONAL, INC. (USA)
SPECIFICATIONS
materialSTEEL COMP 303 OR STEEL COMP 303SE OR STEEL COMP 303 PLUS X OVERALL
nut_styleHEXAGON
nut_height0.077 INCHES MINIMUM AND 0.087 INCHES MAXIMUM IN
thread_class2B
thread_seriesUNF
thread_directionRIGHT-HAND
width_across_flats0.172 INCHES MINIMUM AND 0.203 INCHES MAXIMUM IN
nominal_thread_size0.099 INCHES IN
bearing_surface_typeWASHER FACED
thread_quantity_per_inch56
material_document_and_classificationAMS 5640 ASSN STD ALL MATERIAL RESPONSES OVERALL
NSN5310-00-755-7436
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: SB496 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
WIDTH ACROSS FLATS: 0.172 INCHES MINIMUM AND 0.204 INCHES MAXIMUM IN
•
BEARING SURFACE FINISH: 63.0 MICROINCHES
•
THREAD SERIES: UNF
•
MATERIAL DOCUMENT AND CLASSIFICATION: AMS 5640 ASSN STD ALL MATERIAL RESPONSES OVERALL
•
THREAD DIRECTION: RIGHT-HAND
•
NOMINAL THREAD SIZE: 0.099 INCHES IN
•
NUT HEIGHT: 0.072 INCHES MINIMUM AND 0.092 INCHES MAXIMUM IN
•
COUNTERSINK ANGLE: 44.0 DEGREES MINIMUM AND 46.0 DEGREES MAXIMUM NUT
TECHNICAL CHARACTERISTICS
WIDTH ACROSS FLATS0.172 INCHES MINIMUM AND 0.204 INCHES MAXIMUM IN
BEARING SURFACE FINISH63.0 MICROINCHES
THREAD SERIESUNF
MATERIAL DOCUMENT AND CLASSIFICATIONAMS 5640 ASSN STD ALL MATERIAL RESPONSES OVERALL
THREAD DIRECTIONRIGHT-HAND
NOMINAL THREAD SIZE0.099 INCHES IN
NUT HEIGHT0.072 INCHES MINIMUM AND 0.092 INCHES MAXIMUM IN
COUNTERSINK ANGLE44.0 DEGREES MINIMUM AND 46.0 DEGREES MAXIMUM NUT
NUT STYLEHEXAGON
THREAD CLASS2B
SUBSTITUTES & CROSS-REFERENCES

No substitute or cross-reference records for this part.

LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy SB496?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is SB496?
SB496 is a NUT,PLAIN,HEXAGON.
What is the NSN for SB496?
SB496 is cataloged in the U.S. Government catalog under NSN 5310-00-755-7436. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — SB496