SB197 — SHAFT,DRIVE,FLEXIBLE

✓ Government record, cited

— · COMPONENT

PRODUCT OVERVIEW

SB197: SHAFT,DRIVE,FLEXIBLE.

The SHAFT,DRIVE,FLEXIBLE is a the manufacturer industrial component. Key specifications include end_type: ROUND, FLATTED TWO SIDES, EXTERNAL, material: NICKEL ALLOY SHAFT, unit_type: WIRE WOUND, overall_length: 20.000 INCHES NOMINAL IN, size_designator: 0.250 IN. DIA IN, outside_diameter: 0.250 INCHES NOMINAL IN.

This part is cataloged in the U.S. Government catalog under NSN 3040-00-770-0313, indicating validated use in U.S. government and defense logistics supply chains.

Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS

SB197

NSN: 3040-00-770-0313
FSC: 3040 — Miscellaneous Power Transmission Equipment
CAGE: 72166 — B.W. ELLIOTT MANUFACTURING CO., LLC (USA)

SPECIFICATIONS

end_type	ROUND, FLATTED TWO SIDES, EXTERNAL
material	NICKEL ALLOY SHAFT
unit_type	WIRE WOUND
overall_length	20.000 INCHES NOMINAL IN
size_designator	0.250 IN. DIA IN
outside_diameter	0.250 INCHES NOMINAL IN
end_overall_length	0.750 INCHES MINIMUM AND 0.938 INCHES MAXIMUM IN
machined_feature_size	0.250 IN. LG BY 0.228IN W FLATS IN
securing_hole_thread_size	8-32
cross_section_size_and_location	0.250 INCHES MINIMUM DIAMETER AND 0.500 INCHES MAXIMUM DIAMETER IN
threaded_securing_hole_location	LOCATED 90 DEG APART
threaded_securing_hole_quantity	2
NSN	3040-00-770-0313

COMPONENT DIAGRAM

KEY FEATURES

•

THREADED SECURING HOLE LOCATION: LOCATED 90 DEG APART

•

CROSS SECTION SIZE AND LOCATION: 0.250 INCHES MINIMUM DIAMETER AND 0.500 INCHES MAXIMUM DIAMETER IN

•

SIZE DESIGNATOR: 0.250 IN. DIA IN

•

OUTSIDE DIAMETER: 0.250 INCHES NOMINAL IN

•

SECURING HOLE THREAD SIZE: 8-32

•

END OVERALL LENGTH: 0.750 INCHES MINIMUM AND 0.938 INCHES MAXIMUM IN

•

UNIT TYPE: WIRE WOUND

TECHNICAL CHARACTERISTICS

THREADED SECURING HOLE LOCATION	LOCATED 90 DEG APART
CROSS SECTION SIZE AND LOCATION	0.250 INCHES MINIMUM DIAMETER AND 0.500 INCHES MAXIMUM DIAMETER IN
SIZE DESIGNATOR	0.250 IN. DIA IN
OVERALL LENGTH	20.000 INCHES NOMINAL IN
OUTSIDE DIAMETER	0.250 INCHES NOMINAL IN
SECURING HOLE THREAD SIZE	8-32
END OVERALL LENGTH	0.750 INCHES MINIMUM AND 0.938 INCHES MAXIMUM IN
UNIT TYPE	WIRE WOUND
MATERIAL	NICKEL ALLOY SHAFT
MACHINED FEATURE SIZE	0.250 IN. LG BY 0.228IN W FLATS IN

OTHER ITEMS IN FSC 3040 — Miscellaneous Power Transmission Equipment

Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.

3040-00-001-0046 3040-00-001-0047 3040-00-001-0048 3040-00-001-0068 3040-00-001-0077 3040-00-001-0078 3040-00-001-0089 3040-00-001-1224

SUBSTITUTES & CROSS-REFERENCES 1

1649043Same NSN cross-reference

Same NSN cross-reference

Also cataloged under this NSN

LIFECYCLE

NSN statusActive· U.S. Government catalog

Acquisition advice: Terminal item — stock exhausted; no further procurementNo demilitarization required

Ready to buy SB197?

Compare prices from verified sellers on eBay

Buy on eBay →

As an eBay Partner, PartsTable may earn a commission. Your price is not affected.

FREQUENTLY ASKED QUESTIONS

What is SB197?

SB197 is a SHAFT,DRIVE,FLEXIBLE.

What parts can replace SB197?

There is 1 known substitute for SB197: 1649043. Substitute compatibility should be verified for your specific system.

What is the NSN for SB197?

SB197 is cataloged in the U.S. Government catalog under NSN 3040-00-770-0313. This indicates validated use in U.S. government and defense supply chains.

Community Feedback

SB197 — SHAFT,DRIVE,FLEXIBLE

Request a Quote — SB197