PartsTable
Technical Data Sheet
Download PDF

SB1117-1 — BEARING,BALL,DUPLEX

✓ Government record, cited
— · TAPERED BEARING
PRODUCT OVERVIEW

SB1117-1: BEARING,BALL,DUPLEX.

The BEARING,BALL,DUPLEX is a the manufacturer industrial component. Key specifications include material: STEEL COMP E52100 BALL, bore_diameter: 0.9841 INCHES MINIMUM AND 0.9843 INCHES MAXIMUM IN, overall_width: 0.9249 INCHES MINIMUM AND 0.9449 INCHES MAXIMUM IN, load_direction: ANGULAR, surface_finish: GROUND, style_designator: COUNTERBORED OUTER RINGS, NON-SEPARABLE, FACE TO FACE MOUNTING. This part is cataloged in the U.S.

Government catalog under NSN 3110-00-702-2042, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
SB1117-1
NSN: 3110-00-702-2042
FSC: 3110 — Bearings, Antifriction, Unmounted
CAGE: 78286 — SIKORSKY AIRCRAFT CORPORATION DBA SIKORSKY AIRCRAFT CORP (USA)
SPECIFICATIONS
materialSTEEL COMP E52100 BALL
bore_diameter0.9841 INCHES MINIMUM AND 0.9843 INCHES MAXIMUM IN
overall_width0.9249 INCHES MINIMUM AND 0.9449 INCHES MAXIMUM IN
load_directionANGULAR
surface_finishGROUND
style_designatorCOUNTERBORED OUTER RINGS, NON-SEPARABLE, FACE TO FACE MOUNTING
overall_outside_diameter1.8501 INCHES MINIMUM AND 1.8504 INCHES MAXIMUM IN
internal_fit-up_designationSTANDARD
retainer_fabrication_methodMACHINED
standard_tolerance_designationABEC NO.3
material_document_and_classificationUNABLE TO DECODE
NSN3110-00-702-2042
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: SB1117-1 · OEM ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
RETAINER FABRICATION METHOD: MACHINED
•
INTERNAL FIT-UP DESIGNATION: STANDARD
•
SURFACE FINISH: GROUND
•
STYLE DESIGNATOR: COUNTERBORED OUTER RINGS, NON-SEPARABLE, FACE TO FACE MOUNTING
•
MATERIAL DOCUMENT AND CLASSIFICATION: UNABLE TO DECODE
•
OVERALL OUTSIDE DIAMETER: 1.8501 INCHES MINIMUM AND 1.8504 INCHES MAXIMUM IN
•
LOAD DIRECTION: ANGULAR
TECHNICAL CHARACTERISTICS
RETAINER FABRICATION METHODMACHINED
INTERNAL FIT-UP DESIGNATIONSTANDARD
SURFACE FINISHGROUND
STYLE DESIGNATORCOUNTERBORED OUTER RINGS, NON-SEPARABLE, FACE TO FACE MOUNTING
MATERIAL DOCUMENT AND CLASSIFICATIONUNABLE TO DECODE
OVERALL WIDTH0.9249 INCHES MINIMUM AND 0.9449 INCHES MAXIMUM IN
OVERALL OUTSIDE DIAMETER1.8501 INCHES MINIMUM AND 1.8504 INCHES MAXIMUM IN
LOAD DIRECTIONANGULAR
STANDARD TOLERANCE DESIGNATIONABEC NO.3
BORE DIAMETER0.9841 INCHES MINIMUM AND 0.9843 INCHES MAXIMUM IN
OTHER ITEMS IN FSC 3110 — Bearings, Antifriction, Unmounted
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
3110-00-001-1937 3110-00-001-1938 3110-00-001-4661 3110-00-001-4662 3110-00-001-4689 3110-00-001-4722
SUBSTITUTES & CROSS-REFERENCES 1
105KRDF-B3-8AD15C1859123AReference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy SB1117-1?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is SB1117-1?
SB1117-1 is a BEARING,BALL,DUPLEX.
What parts can replace SB1117-1?
There is 1 known substitute for SB1117-1: 105KRDF-B3-8AD15C1859123A. Substitute compatibility should be verified for your specific system.
What is the NSN for SB1117-1?
SB1117-1 is cataloged in the U.S. Government catalog under NSN 3110-00-702-2042. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — SB1117-1