PartsTable
Technical Data Sheet
Download PDF

SB-24 — CLAMP,LOOP

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

SB-24: CLAMP,LOOP.

The CLAMP,LOOP is a the manufacturer industrial component. Key specifications include material: STEEL BAND, overall_width: 0.313 INCHES NOMINAL IN, style_designator: CENTER MOUNT, tongue_hole_type: ROUND, THREADED, surface_treatment: CADMIUM BAND, material_thickness: 0.032 INCHES NOMINAL IN. This part is cataloged in the U.S.

Government catalog under NSN 5340-00-688-0016, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
SB-24
NSN: 5340-00-688-0016
FSC: 5340 — Hardware, Commercial
CAGE: 14242 — VOSS INDUSTRIES, LLC (USA)
SPECIFICATIONS
materialSTEEL BAND
overall_width0.313 INCHES NOMINAL IN
style_designatorCENTER MOUNT
tongue_hole_typeROUND, THREADED
surface_treatmentCADMIUM BAND
material_thickness0.032 INCHES NOMINAL IN
nominal_thread_size0.138 INCHES IN
loop_inside_diameter0.750 INCHES NOMINAL IN
thread_quantity_per_inch32
specification/standard_data17532-GC12 MANUFACTURERS SPECIFICATION
distance_from_loop_center_to_tongue_end0.750 INCHES NOMINAL IN
center_to_center_distance_between_loop_and_mounting_hole0.563 INCHES NOMINAL IN
NSN5340-00-688-0016
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: SB-24 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
STYLE DESIGNATOR: CENTER MOUNT
•
MATERIAL THICKNESS: 0.032 INCHES NOMINAL IN
•
DISTANCE FROM LOOP CENTER TO TONGUE END: 0.750 INCHES NOMINAL IN
•
NOMINAL THREAD SIZE: 0.138 INCHES IN
•
SPECIFICATION/STANDARD DATA: 17532-GC12 MANUFACTURERS SPECIFICATION
•
SURFACE TREATMENT: CADMIUM BAND
•
THREAD QUANTITY PER INCH: 32
TECHNICAL CHARACTERISTICS
STYLE DESIGNATORCENTER MOUNT
OVERALL WIDTH0.313 INCHES NOMINAL IN
MATERIAL THICKNESS0.032 INCHES NOMINAL IN
DISTANCE FROM LOOP CENTER TO TONGUE END0.750 INCHES NOMINAL IN
NOMINAL THREAD SIZE0.138 INCHES IN
SPECIFICATION/STANDARD DATA17532-GC12 MANUFACTURERS SPECIFICATION
SURFACE TREATMENTCADMIUM BAND
THREAD QUANTITY PER INCH32
TONGUE HOLE TYPEROUND, THREADED
CENTER TO CENTER DISTANCE BETWEEN LOOP AND MOUNTING HOLE0.563 INCHES NOMINAL IN
OTHER ITEMS IN FSC 5340 — Hardware, Commercial
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5340-00-000-0068 5340-00-000-0132 5340-00-000-8150 5340-00-001-1251 5340-00-001-1264 5340-00-001-1265 5340-00-001-1266 5340-00-001-1275
SUBSTITUTES & CROSS-REFERENCES 1
GC12A24Reference document
Same NSN cross-reference
Reference document — Vendor item drawing reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required
Ready to buy SB-24?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is SB-24?
SB-24 is a CLAMP,LOOP.
What parts can replace SB-24?
There is 1 known substitute for SB-24: GC12A24. Substitute compatibility should be verified for your specific system.
What is the NSN for SB-24?
SB-24 is cataloged in the U.S. Government catalog under NSN 5340-00-688-0016. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — SB-24

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.