PartsTable
Technical Data Sheet
PartsTable / COMPONENT / SB 22210 W 33 SS
SB 22210 W 33 SS ✓ Verified by PartsTable
— · TAPERED BEARING
WHAT YOU NEED TO KNOW
Cup and cone sold separately — confirm both needed Timken series numbers indicate dimensions
Cup and cone NOT sold as set — verify order
PRODUCT OVERVIEW

The BEARING,ROLLER,SELF-ALIGNING is a the manufacturer industrial component. Key specifications include material: STEEL OUTER RING, bore_shape: STRAIGHT, bore_diameter: 50.0 MILLIMETERS NOMINAL MM, overall_width: 23.00 MILLIMETERS NOMINAL MM, surface_finish: GROUND, special_features: WITH 2 DEG MISALIGNMENT. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-479-0009, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
SB 22210 W 33 SS
NSN: 3110-00-479-0009
FSC: 3110
CAGE: 92563 — MCGILL MANUFACTURING CO, INC (USA)
SPECIFICATIONS
materialSTEEL OUTER RING
bore_shapeSTRAIGHT
bore_diameter50.0 MILLIMETERS NOMINAL MM
overall_width23.00 MILLIMETERS NOMINAL MM
seal_quantity1
surface_finishGROUND
special_featuresWITH 2 DEG MISALIGNMENT
overall_outside_diameter90.00 MILLIMETERS NOMINAL MM
internal_fit-up_designationSTANDARD
retainer_fabrication_methodPRESSED
standard_tolerance_designationRBEC NO.1
NSN3110-00-479-0009
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: SB 22210 W 33 SS · OEM ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
BORE SHAPE: STRAIGHT
•
RETAINER FABRICATION METHOD: PRESSED
•
STANDARD TOLERANCE DESIGNATION: RBEC NO.1
•
MATERIAL: STEEL ROLLER
TECHNICAL CHARACTERISTICS (FLIS)
BORE SHAPESTRAIGHT
RETAINER FABRICATION METHODPRESSED
OVERALL WIDTH23.00 MILLIMETERS NOMINAL MM
STANDARD TOLERANCE DESIGNATIONRBEC NO.1
MATERIALSTEEL ROLLER
MATERIALSTEEL RETAINER
MATERIALPLASTIC POLYAMIDE NYLON SEAL
MATERIALSTEEL OUTER RING
MATERIALSTEEL INNER RING
SEAL QUANTITY1
VERIFIED SUBSTITUTES & CROSS-REFERENCES 20
B107.2 TY1CL2Interchangeable
interchangeable cross-reference
interchangeable
3KK82Interchangeable
interchangeable cross-reference
interchangeable
SIM422Interchangeable
interchangeable cross-reference
interchangeable
GGG-R-180 TY1CL1GRAInterchangeable
interchangeable cross-reference
interchangeable
21242Interchangeable
interchangeable cross-reference
interchangeable
GGG-R-180Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy SB 22210 W 33 SS?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is SB 22210 W 33 SS?
SB 22210 W 33 SS is a BEARING,ROLLER,SELF-ALIGNING.
What parts can replace SB 22210 W 33 SS?
There are 20 known substitutes for SB 22210 W 33 SS: B107.2 TY1CL2, 3KK82, SIM422 and 17 more. Substitute compatibility should be verified for your specific system.
What is the NSN for SB 22210 W 33 SS?
SB 22210 W 33 SS is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-479-0009. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — SB 22210 W 33 SS

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026