PartsTable
Technical Data Sheet
Download PDF

SAP 25731096 — SCREW,CAP,SOCKET HEAD

✓ Government record, cited
— · BOLT SCREW
PRODUCT OVERVIEW

SAP 25731096: SCREW,CAP,SOCKET HEAD.

The SCREW,CAP,SOCKET HEAD is a the manufacturer industrial component. Key specifications include head_height: 0.250 INCHES NOMINAL IN, head_diameter: 0.188 INCHES NOMINAL IN, fastener_length: 0.375 INCHES NOMINAL IN, thread_direction: RIGHT-HAND, nominal_thread_diameter: 0.138 INCHES IN, thread_quantity_per_inch: 32. This part is cataloged in the U.S.

Government catalog under NSN 5305-01-117-6221, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
SAP 25731096
NSN: 5305-01-117-6221
FSC: 5305 — Screws
CAGE: K1156 — BAE SYSTEMS INTEGRATED SYSTEM TECHNOLOGIES LTD (GBR)
SPECIFICATIONS
head_height0.250 INCHES NOMINAL IN
head_diameter0.188 INCHES NOMINAL IN
fastener_length0.375 INCHES NOMINAL IN
thread_directionRIGHT-HAND
nominal_thread_diameter0.138 INCHES IN
thread_quantity_per_inch32
thread_series_designatorUNIFIED NATIONAL COARSE (UNC)
NSN5305-01-117-6221
COMPONENT DIAGRAM
BOLT / SCREW — THREAD VERIFICATION REQUIRED Hex HEAD LENGTH: — THREAD: — × — MATERIAL: — PN: SAP 25731096 · OEM ⚠ VERIFY BEFORE ORDERING Verify thread pitch before ordering — metric (M8×1.25) ≠ imperial (5/16-18). Wrong thread = wrong part. Grade/class stamped on bolt head determines tensile strength ✓ BROKER TIP Grade/class stamped on head determines tensile strength. Grade 8 > Grade 5 > Grade 2. Always confirm head marking matches specification requirement PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
HEAD HEIGHT: 0.250 INCHES NOMINAL IN
•
FASTENER LENGTH: 0.375 INCHES NOMINAL IN
•
NOMINAL THREAD DIAMETER: 0.138 INCHES IN
•
THREAD DIRECTION: RIGHT-HAND
•
THREAD QUANTITY PER INCH: 32
•
THREAD SERIES DESIGNATOR: UNIFIED NATIONAL COARSE (UNC)
•
HEAD DIAMETER: 0.188 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS
HEAD HEIGHT0.250 INCHES NOMINAL IN
FASTENER LENGTH0.375 INCHES NOMINAL IN
NOMINAL THREAD DIAMETER0.138 INCHES IN
THREAD DIRECTIONRIGHT-HAND
THREAD QUANTITY PER INCH32
THREAD SERIES DESIGNATORUNIFIED NATIONAL COARSE (UNC)
HEAD DIAMETER0.188 INCHES NOMINAL IN
SUBSTITUTES & CROSS-REFERENCES 3
ANIC-BE-8381054Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
1FC1-ND-0000-00005Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
CTA0028Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required
Ready to buy SAP 25731096?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is SAP 25731096?
SAP 25731096 is a SCREW,CAP,SOCKET HEAD.
What parts can replace SAP 25731096?
There are 3 known substitutes for SAP 25731096: ANIC-BE-8381054, 1FC1-ND-0000-00005, CTA0028. Substitute compatibility should be verified for your specific system.
What is the NSN for SAP 25731096?
SAP 25731096 is cataloged in the U.S. Government catalog under NSN 5305-01-117-6221. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — SAP 25731096

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.