PartsTable
Technical Data Sheet

SAO1 15/16 — BEARING UNIT,BALL

✓ Government record, cited
— · BALL BEARING
PRODUCT OVERVIEW

SAO1 15/16: BEARING UNIT,BALL.

The BEARING UNIT,BALL is a the manufacturer industrial component. Key specifications include material: STEEL SEAL, seal_type: LABYRINTH, block_type: FIXED, base_length: 3.1250 INCHES NOMINAL IN, bore_diameter: 1.9375 INCHES NOMINAL IN, housing_width: 11.3750 INCHES NOMINAL IN. This part is cataloged in the U.S.

Government catalog under NSN 3130-00-190-9358, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
SAO1 15/16
NSN: 3130-00-190-9358
FSC: 3130 — Bearings, Mounted
CAGE: 21335 — TIMKEN CO DIV THE TIMKEN COMPANY (USA)
SPECIFICATIONS
materialSTEEL SEAL
seal_typeLABYRINTH
block_typeFIXED
base_length3.1250 INCHES NOMINAL IN
bore_diameter1.9375 INCHES NOMINAL IN
housing_width11.3750 INCHES NOMINAL IN
seal_locationONE END
alignment_typeSELF-ALIGNING
base_thickness0.8125 INCHES NOMINAL IN
housing_height5.8750 INCHES NOMINAL IN
shaft_end_typeOPEN
collar_locationONE END
NSN3130-00-190-9358
COMPONENT DIAGRAM
BALL BEARING — SEAL TYPE DETERMINES MAINTENANCE OD: — · BORE: — · WIDTH: — SEAL: Open · PN: SAO1 15/16 · OEM ⚠ VERIFY BEFORE ORDERING ABEC grade: higher = tighter tolerance = higher cost. ABEC-1 is standard, ABEC-7+ for precision spindles. Open, shielded (ZZ), and sealed (2RS) versions have different max RPM ratings ✓ BROKER TIP 2RS = sealed for life (no maintenance). ZZ = shielded, re-greaseable. Open = must lubricate on install. Common interchange: 6205-2RS = 6205-2RSR = 6205-DDU (same bearing, different suffix) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
SEAL TYPE: LABYRINTH
•
LUBRICATION FITTING TYPE: PIPE PLUG
•
ASSEMBLY OVERALL LENGTH: 4.3437 INCHES NOMINAL IN
•
HOUSING HEIGHT: 5.8750 INCHES NOMINAL IN
•
MOUNTING SLOT LENGTH: 1.0000 INCHES NOMINAL IN
•
INTERNAL FIT-UP DESIGNATION: STANDARD
•
MOUNTING HOLE TYPE: SLOTTED
•
ROTATING ELEMENT LOCKING METHOD: SETSCREW LOCKING COLLAR
TECHNICAL CHARACTERISTICS
SEAL TYPELABYRINTH
LUBRICATION FITTING TYPEPIPE PLUG
ASSEMBLY OVERALL LENGTH4.3437 INCHES NOMINAL IN
HOUSING HEIGHT5.8750 INCHES NOMINAL IN
MOUNTING SLOT LENGTH1.0000 INCHES NOMINAL IN
INTERNAL FIT-UP DESIGNATIONSTANDARD
MOUNTING HOLE TYPESLOTTED
ROTATING ELEMENT LOCKING METHODSETSCREW LOCKING COLLAR
SEAL LOCATIONONE END
BLOCK TYPEFIXED
OTHER ITEMS IN FSC 3130 — Bearings, Mounted
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
3130-00-001-5118 3130-00-001-5137 3130-00-001-6585 3130-00-003-0422 3130-00-003-0455 3130-00-003-0794 3130-00-003-2802 3130-00-003-9535
SUBSTITUTES & CROSS-REFERENCES 3
2657C4AReference document
Same NSN cross-reference
Reference document — Secondary reference
1044461Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
RSAO1 15/16Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy SAO1 15/16?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is SAO1 15/16?
SAO1 15/16 is a BEARING UNIT,BALL.
What parts can replace SAO1 15/16?
There are 3 known substitutes for SAO1 15/16: 2657C4A, 1044461, RSAO1 15/16. Substitute compatibility should be verified for your specific system.
What is the NSN for SAO1 15/16?
SAO1 15/16 is cataloged in the U.S. Government catalog under NSN 3130-00-190-9358. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — SAO1 15/16