PartsTable
Technical Data Sheet
Download PDF

SAM704-1 — LATCH,RIM

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

SAM704-1: LATCH,RIM.

The LATCH,RIM is a the manufacturer industrial component. Key specifications include bolt_type: REGULAR BEVEL, action_type: SPRING, operation_method: PULL RING LATCH BOLT, special_features: HOLE DIAMETER:0.198 IN.MIN,0.204 IN.MAX;CASE SHAPE:RECTANGULAR;HOLE SPACING:1.450 IN. C TO CENTER IN.

This part is cataloged in the U.S. Government catalog under NSN 5340-00-134-3258, indicating validated use in U.S. government and defense logistics supply chains.

Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
SAM704-1
NSN: 5340-00-134-3258
FSC: 5340 — Hardware, Commercial
CAGE: 31845 — SEALTH AERO MARINE CO. (USA)
SPECIFICATIONS
bolt_typeREGULAR BEVEL
action_typeSPRING
operation_methodPULL RING LATCH BOLT
special_featuresHOLE DIAMETER:0.198 IN.MIN,0.204 IN.MAX;CASE SHAPE:RECTANGULAR;HOLE SPACING:1.450 IN. C TO CENTER IN
mounting_hole_quantity2
NSN5340-00-134-3258
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: SAM704-1 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
MOUNTING HOLE QUANTITY: 2
•
BOLT TYPE: REGULAR BEVEL
•
ACTION TYPE: SPRING
•
OPERATION METHOD: PULL RING LATCH BOLT
TECHNICAL CHARACTERISTICS
MOUNTING HOLE QUANTITY2
BOLT TYPEREGULAR BEVEL
ACTION TYPESPRING
SPECIAL FEATURESHOLE DIAMETER:0.198 IN.MIN,0.204 IN.MAX;CASE SHAPE:RECTANGULAR;HOLE SPACING:1.450 IN. C TO CENTER IN
OPERATION METHODPULL RING LATCH BOLT
OTHER ITEMS IN FSC 5340 — Hardware, Commercial
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5340-00-000-0068 5340-00-000-0132 5340-00-000-8150 5340-00-001-1251 5340-00-001-1264 5340-00-001-1265 5340-00-001-1266 5340-00-001-1275
SUBSTITUTES & CROSS-REFERENCES 1
369A8442Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy SAM704-1?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is SAM704-1?
SAM704-1 is a LATCH,RIM.
What parts can replace SAM704-1?
There is 1 known substitute for SAM704-1: 369A8442. Substitute compatibility should be verified for your specific system.
What is the NSN for SAM704-1?
SAM704-1 is cataloged in the U.S. Government catalog under NSN 5340-00-134-3258. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — SAM704-1

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.