PartsTable
Technical Data Sheet
Download PDF

SAM201008 — WASHER,SPRING TENSION

✓ Government record, cited
— · NUT WASHER
PRODUCT OVERVIEW

SAM201008: WASHER,SPRING TENSION.

The WASHER,SPRING TENSION is a the manufacturer industrial component. Key specifications include material: STEEL COMP 1075 OR STEEL COMP 6150 OVERALL, hole_diameter: 0.402 INCHES MINIMUM AND 0.409 INCHES MAXIMUM IN, overall_height: 0.0512 INCHES MINIMUM AND 0.0572 INCHES MAXIMUM IN, hardness_rating: 49.0 ROCKWELL C MINIMUM AND 51.0 ROCKWELL C MAXIMUM, outside_diameter: 0.779 INCHES MINIMUM AND 0.787 INCHES MAXIMUM IN, style_designator: SPRING TENSION. This part is cataloged in the U.S.

Government catalog under NSN 5310-01-162-8575, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
SAM201008
NSN: 5310-01-162-8575
FSC: 5310 — Nuts and Washers
CAGE: 4XNY8 — MATTHEW WARREN, INC. DIV MARYLAND PRECISION SPRING (USA)
SPECIFICATIONS
materialSTEEL COMP 1075 OR STEEL COMP 6150 OVERALL
hole_diameter0.402 INCHES MINIMUM AND 0.409 INCHES MAXIMUM IN
overall_height0.0512 INCHES MINIMUM AND 0.0572 INCHES MAXIMUM IN
hardness_rating49.0 ROCKWELL C MINIMUM AND 51.0 ROCKWELL C MAXIMUM
outside_diameter0.779 INCHES MINIMUM AND 0.787 INCHES MAXIMUM IN
style_designatorSPRING TENSION
material_thickness0.0305 INCHES MINIMUM AND 0.0325 INCHES MAXIMUM IN
NSN5310-01-162-8575
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: SAM201008 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
HARDNESS RATING: 49.0 ROCKWELL C MINIMUM AND 51.0 ROCKWELL C MAXIMUM
•
STYLE DESIGNATOR: SPRING TENSION
•
OUTSIDE DIAMETER: 0.779 INCHES MINIMUM AND 0.787 INCHES MAXIMUM IN
•
MATERIAL THICKNESS: 0.0305 INCHES MINIMUM AND 0.0325 INCHES MAXIMUM IN
•
MATERIAL: STEEL COMP 1075 OR STEEL COMP 6150 OVERALL
•
HOLE DIAMETER: 0.402 INCHES MINIMUM AND 0.409 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS
OVERALL HEIGHT0.0512 INCHES MINIMUM AND 0.0572 INCHES MAXIMUM IN
HARDNESS RATING49.0 ROCKWELL C MINIMUM AND 51.0 ROCKWELL C MAXIMUM
STYLE DESIGNATORSPRING TENSION
OUTSIDE DIAMETER0.779 INCHES MINIMUM AND 0.787 INCHES MAXIMUM IN
MATERIAL THICKNESS0.0305 INCHES MINIMUM AND 0.0325 INCHES MAXIMUM IN
MATERIALSTEEL COMP 1075 OR STEEL COMP 6150 OVERALL
HOLE DIAMETER0.402 INCHES MINIMUM AND 0.409 INCHES MAXIMUM IN
OTHER ITEMS IN FSC 5310 — Nuts and Washers
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5310-00-000-0040 5310-00-000-0077 5310-00-000-0079 5310-00-000-1146 5310-00-000-3815 5310-00-000-4532 5310-00-000-4540
SUBSTITUTES & CROSS-REFERENCES 1
AM-201008Reference document
Same NSN cross-reference
Reference document — Advisory reference — outside the item-of-supply concept
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required
Ready to buy SAM201008?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is SAM201008?
SAM201008 is a WASHER,SPRING TENSION.
What parts can replace SAM201008?
There is 1 known substitute for SAM201008: AM-201008. Substitute compatibility should be verified for your specific system.
What is the NSN for SAM201008?
SAM201008 is cataloged in the U.S. Government catalog under NSN 5310-01-162-8575. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — SAM201008

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.