PartsTable
Technical Data Sheet

SAE5/8 — WASHER,FLAT

✓ Government record, cited
— · NUT WASHER
PRODUCT OVERVIEW

SAE5/8: WASHER,FLAT.

The WASHER,FLAT is a the manufacturer industrial component. Key specifications include material: STEEL OVERALL, thickness: 0.074 MILLIMETERS MINIMUM AND 0.121 MILLIMETERS MAXIMUM MM, hole_diameter: 0.649 MILLIMETERS MINIMUM AND 0.686 MILLIMETERS MAXIMUM MM, outside_diameter: 1.305 MILLIMETERS MINIMUM AND 1.342 MILLIMETERS MAXIMUM MM, surface_treatment: OXIDE AND ZINC OVERALL, part_name_assigned_by_controlling_agency: LOW CARBON STAINLESS WASHER. This part is cataloged in the U.S.

Government catalog under NSN 5310-01-690-9572, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
SAE5/8
NSN: 5310-01-690-9572
FSC: 5310 — Nuts and Washers
CAGE: 65XX0 — FASTENER SUPERSTORE INC (USA)
SPECIFICATIONS
materialSTEEL OVERALL
thickness0.074 MILLIMETERS MINIMUM AND 0.121 MILLIMETERS MAXIMUM MM
hole_diameter0.649 MILLIMETERS MINIMUM AND 0.686 MILLIMETERS MAXIMUM MM
outside_diameter1.305 MILLIMETERS MINIMUM AND 1.342 MILLIMETERS MAXIMUM MM
surface_treatmentOXIDE AND ZINC OVERALL
part_name_assigned_by_controlling_agencyLOW CARBON STAINLESS WASHER
NSN5310-01-690-9572
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: SAE5/8 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
OUTSIDE DIAMETER: 1.305 MILLIMETERS MINIMUM AND 1.342 MILLIMETERS MAXIMUM MM
•
SURFACE TREATMENT: OXIDE AND ZINC OVERALL
•
MATERIAL: STEEL OVERALL
•
HOLE DIAMETER: 0.649 MILLIMETERS MINIMUM AND 0.686 MILLIMETERS MAXIMUM MM
•
THICKNESS: 0.074 MILLIMETERS MINIMUM AND 0.121 MILLIMETERS MAXIMUM MM
TECHNICAL CHARACTERISTICS
OUTSIDE DIAMETER1.305 MILLIMETERS MINIMUM AND 1.342 MILLIMETERS MAXIMUM MM
SURFACE TREATMENTOXIDE AND ZINC OVERALL
PART NAME ASSIGNED BY CONTROLLING AGENCYLOW CARBON STAINLESS WASHER
MATERIALSTEEL OVERALL
HOLE DIAMETER0.649 MILLIMETERS MINIMUM AND 0.686 MILLIMETERS MAXIMUM MM
THICKNESS0.074 MILLIMETERS MINIMUM AND 0.121 MILLIMETERS MAXIMUM MM
OTHER ITEMS IN FSC 5310 — Nuts and Washers
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5310-00-000-0040 5310-00-000-0077 5310-00-000-0079 5310-00-000-1146 5310-00-000-3815 5310-00-000-4532 5310-00-000-4540
SUBSTITUTES & CROSS-REFERENCES

No substitute or cross-reference records for this part.

LIFECYCLE
NSN statusActive· U.S. Government catalog
No demilitarization required
Ready to buy SAE5/8?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is SAE5/8?
SAE5/8 is a WASHER,FLAT.
What is the NSN for SAE5/8?
SAE5/8 is cataloged in the U.S. Government catalog under NSN 5310-01-690-9572. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — SAE5/8