PartsTable
Technical Data Sheet
Download PDF

SAE100R2 TYPE AT — HOSE,NONMETALLIC

✓ Government record, cited
— · PIPE SECTION
PRODUCT OVERVIEW

SAE100R2 TYPE AT: HOSE,NONMETALLIC.

The HOSE,NONMETALLIC is a the manufacturer industrial component. Key specifications include material: RUBBER SYNTHETIC TUBE, temp_rating: -40.0 FAHRENHEIT AND 212.0 FAHRENHEIT SINGLE RESPONSE DEGF, vacuum_in_torr: 50.8, inside_diameter: 0.625 INCHES NOMINAL IN, outside_diameter: 1.000 INCHES NOMINAL IN, special_features: HOSE MEETS DIN 20 022 TYPE 2SN, EXCEEDS SAE 100R2AT. This part is cataloged in the U.S.

Government catalog under NSN 4720-01-413-4057, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
SAE100R2 TYPE AT
NSN: 4720-01-413-4057
FSC: 4720 — Hose and Flexible Tubing
CAGE: 98441 — PARKER HANNIFIN CORP DBA PNEUTRONICS DIV STRATOFLEX PRODUCTS DIVISION (USA)
SPECIFICATIONS
materialRUBBER SYNTHETIC TUBE
temp_rating-40.0 FAHRENHEIT AND 212.0 FAHRENHEIT SINGLE RESPONSE DEGF
vacuum_in_torr50.8
inside_diameter0.625 INCHES NOMINAL IN
outside_diameter1.000 INCHES NOMINAL IN
special_featuresHOSE MEETS DIN 20 022 TYPE 2SN, EXCEEDS SAE 100R2AT
operating_pressure3600.0 POUNDS PER SQUARE INCH (PSI) MAXIMUM SINGLE RESPONSE LBS
burst_test_pressure14500.0 POUNDS PER SQUARE INCH SINGLE RESPONSE LBS
end_item_identificationW/S SUPPLY CLASS AOE
inside_surface_conditionSMOOTH
media_for_which_designedFUEL/OIL, HYDROCARBON SINGLE RESPONSE
hydrostatic_test_pressure7200.0 POUNDS PER SQUARE INCH SINGLE RESPONSE LBS
NSN4720-01-413-4057
COMPONENT DIAGRAM
PIPE SECTION — SCHEDULE = WALL THICKNESS WALL: — OD: — LENGTH: — — — PN: SAE100R2 TYPE AT · OEM ⚠ VERIFY BEFORE ORDERING Schedule = wall thickness, NOT pipe diameter. Sch 40 and Sch 80 have the same OD but different wall thickness. Nominal pipe size ≠ actual OD — a 1" pipe is actually 1.315" OD ✓ BROKER TIP Sch 40 = standard wall, Sch 80 = heavy wall (higher pressure), Sch 160 = extra heavy. Seamless pipe is required for high-pressure applications — welded pipe has lower ratings PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
TEMP RATING: -40.0 FAHRENHEIT AND 212.0 FAHRENHEIT SINGLE RESPONSE DEGF
•
MINIMUM INSIDE BENDING RADIUS: 8.000 INCHES IN
•
VACUUM IN TORR: 50.8
•
LAYER COMPOSITION AND LOCATION: 1ST LAYER BRAIDED WIRE AND 2ND LAYER BRAIDED WIRE AND OUTER LAYER WRAPPED RUBBER, SYNTHETIC
•
CROSS-SECTIONAL SHAPE STYLE: ROUND
•
OUTSIDE DIAMETER: 1.000 INCHES NOMINAL IN
•
OPERATING PRESSURE: 3600.0 POUNDS PER SQUARE INCH (PSI) MAXIMUM SINGLE RESPONSE LBS
•
SPECIFICATION/STANDARD DATA: 81343-SAE100R2 PROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD
TECHNICAL CHARACTERISTICS
TEMP RATING-40.0 FAHRENHEIT AND 212.0 FAHRENHEIT SINGLE RESPONSE DEGF
MINIMUM INSIDE BENDING RADIUS8.000 INCHES IN
VACUUM IN TORR50.8
LAYER COMPOSITION AND LOCATION1ST LAYER BRAIDED WIRE AND 2ND LAYER BRAIDED WIRE AND OUTER LAYER WRAPPED RUBBER, SYNTHETIC
CROSS-SECTIONAL SHAPE STYLEROUND
OUTSIDE DIAMETER1.000 INCHES NOMINAL IN
OPERATING PRESSURE3600.0 POUNDS PER SQUARE INCH (PSI) MAXIMUM SINGLE RESPONSE LBS
SPECIFICATION/STANDARD DATA81343-SAE100R2 PROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD
NONDEFINITIVE SPEC/STD DATAAT TYPE
INSIDE DIAMETER0.625 INCHES NOMINAL IN
SUBSTITUTES & CROSS-REFERENCES 3
GH793-10Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
381-10 SAE100R2Reference document
Same NSN cross-reference
Reference document — Advisory reference — outside the item-of-supply concept
381-10Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required
Ready to buy SAE100R2 TYPE AT?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is SAE100R2 TYPE AT?
SAE100R2 TYPE AT is a HOSE,NONMETALLIC.
What parts can replace SAE100R2 TYPE AT?
There are 3 known substitutes for SAE100R2 TYPE AT: GH793-10, 381-10 SAE100R2, 381-10. Substitute compatibility should be verified for your specific system.
What is the NSN for SAE100R2 TYPE AT?
SAE100R2 TYPE AT is cataloged in the U.S. Government catalog under NSN 4720-01-413-4057. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — SAE100R2 TYPE AT

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.