PartsTable
Technical Data Sheet
Download PDF

SAE-AS9603 — BRACKET,ANGLE

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

SAE-AS9603: BRACKET,ANGLE.

The BRACKET,ANGLE is a the manufacturer industrial component. Key specifications include material: STEEL COMP 410, first_leg_angle: 85.0 DEGREES MINIMUM AND 95.0 DEGREES MAXIMUM, first_leg_style: END RADIUS, first_leg_width: 0.740 INCHES MINIMUM AND 0.760 INCHES MAXIMUM IN, first_leg_length: 1.70 INCHES NOMINAL IN, second_leg_style: END RADIUS. This part is cataloged in the U.S.

Government catalog under NSN 5340-00-405-0767, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
SAE-AS9603
NSN: 5340-00-405-0767
NIINs: 004050767, 004723038, 011843801, 012547341, 013027467, 014919931, 015744267, 016245656, 016246385, 016247072
FSC: 5340 — Hardware, Commercial
CAGE: 0U583 — SAE INTERNATIONAL DBA SAE INTERNATIONAL (USA)
SPECIFICATIONS
materialSTEEL COMP 410
hole_quantity2
first_leg_angle85.0 DEGREES MINIMUM AND 95.0 DEGREES MAXIMUM
first_leg_styleEND RADIUS
first_leg_width0.740 INCHES MINIMUM AND 0.760 INCHES MAXIMUM IN
first_leg_length1.70 INCHES NOMINAL IN
second_leg_styleEND RADIUS
second_leg_width0.740 INCHES MINIMUM AND 0.760 INCHES MAXIMUM IN
special_featuresBRACKET HAS A ROCKWELL C HARDNESS RATING OF 30-38.
style_designatorANGLE
second_leg_length2.29 INCHES NOMINAL IN
mounting_hole_typePLAIN
NSN5340-00-405-0767
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: SAE-AS9603 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH: 0.285 INCHES MINIMUM AND 0.295 INCHES MAXIMUM IN
•
FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH: 0.195 INCHES MINIMUM AND 0.205 INCHES MAXIMUM IN
•
FIRST LEG HOLE DIAMETER: 0.200 INCHES MINIMUM AND 0.210 INCHES MAXIMUM IN
•
FIRST LEG ANGLE: 90.0 DEGREES NOMINAL
•
SECOND LEG RELATIONSHIP TO FIRST LEG: NOT IDENTICAL
•
SECOND LEG HOLE DIAMETER: 0.385 INCHES MINIMUM AND 0.395 INCHES MAXIMUM IN
•
SECOND LEG WIDTH: 0.750 INCHES NOMINAL IN
•
SECOND LEG LENGTH: 1.200 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS
SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH0.285 INCHES MINIMUM AND 0.295 INCHES MAXIMUM IN
FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH0.195 INCHES MINIMUM AND 0.205 INCHES MAXIMUM IN
FIRST LEG HOLE DIAMETER0.200 INCHES MINIMUM AND 0.210 INCHES MAXIMUM IN
FIRST LEG ANGLE90.0 DEGREES NOMINAL
SECOND LEG RELATIONSHIP TO FIRST LEGNOT IDENTICAL
SECOND LEG HOLE DIAMETER0.385 INCHES MINIMUM AND 0.395 INCHES MAXIMUM IN
SECOND LEG WIDTH0.750 INCHES NOMINAL IN
SECOND LEG LENGTH1.200 INCHES NOMINAL IN
FIRST LEG HOLE ARRANGEMENT STYLEONE HOLE
SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH0.370 INCHES MINIMUM AND 0.380 INCHES MAXIMUM IN
SUBSTITUTES & CROSS-REFERENCES 1
MS9603-216Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy SAE-AS9603?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is SAE-AS9603?
SAE-AS9603 is a BRACKET,ANGLE.
What parts can replace SAE-AS9603?
There is 1 known substitute for SAE-AS9603: MS9603-216. Substitute compatibility should be verified for your specific system.
What is the NSN for SAE-AS9603?
SAE-AS9603 is cataloged in the U.S. Government catalog under NSN 5340-00-405-0767. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — SAE-AS9603

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.