PartsTable
Technical Data Sheet
Download PDF

SAE-AS9596 — BRACKET,ANGLE

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

SAE-AS9596: BRACKET,ANGLE.

The BRACKET,ANGLE is a the manufacturer industrial component. Key specifications include material: STEEL COMP 321, overall_length: 1.240 INCHES MINIMUM AND 1.260 INCHES MAXIMUM IN, first_leg_style: END RADIUS, style_designator: ANGLE, mounting_hole_type: PLAIN, first_leg_hole_arrangement_style: ONE HOLE. This part is cataloged in the U.S.

Government catalog under NSN 5340-00-283-7546, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
SAE-AS9596
NSN: 5340-00-283-7546
NIINs: 002837546, 003900571, 011976649, 012016934, 012280651, 013853735, 014724358, 015477307, 015650237, 015686964, 015832003, 016870447
FSC: 5340 — Hardware, Commercial
CAGE: 0U583 — SAE INTERNATIONAL DBA SAE INTERNATIONAL (USA)
SPECIFICATIONS
materialSTEEL COMP 321
overall_length1.240 INCHES MINIMUM AND 1.260 INCHES MAXIMUM IN
first_leg_styleEND RADIUS
style_designatorANGLE
mounting_hole_typePLAIN
first_leg_hole_arrangement_styleONE HOLE
second_leg_hole_arrangement_styleONE HOLE
NSN5340-00-283-7546
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: SAE-AS9596 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH: 0.195 INCHES MINIMUM AND 0.205 INCHES MAXIMUM IN
•
FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH: 0.195 INCHES MINIMUM AND 0.205 INCHES MAXIMUM IN
•
FIRST LEG HOLE DIAMETER: 0.200 INCHES MINIMUM AND 0.210 INCHES MAXIMUM IN
•
FIRST LEG ANGLE: 90.0 DEGREES NOMINAL
•
SECOND LEG RELATIONSHIP TO FIRST LEG: NOT IDENTICAL
•
SECOND LEG HOLE DIAMETER: 0.200 INCHES MINIMUM AND 0.210 INCHES MAXIMUM IN
•
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: AMS 2400 ASSN STD SINGLE TREATMENT RESPONSE
•
SECOND LEG WIDTH: 0.500 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS
SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH0.195 INCHES MINIMUM AND 0.205 INCHES MAXIMUM IN
FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH0.195 INCHES MINIMUM AND 0.205 INCHES MAXIMUM IN
FIRST LEG HOLE DIAMETER0.200 INCHES MINIMUM AND 0.210 INCHES MAXIMUM IN
FIRST LEG ANGLE90.0 DEGREES NOMINAL
SECOND LEG RELATIONSHIP TO FIRST LEGNOT IDENTICAL
SECOND LEG HOLE DIAMETER0.200 INCHES MINIMUM AND 0.210 INCHES MAXIMUM IN
SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONAMS 2400 ASSN STD SINGLE TREATMENT RESPONSE
SECOND LEG WIDTH0.500 INCHES NOMINAL IN
SECOND LEG LENGTH1.945 INCHES MINIMUM AND 1.955 INCHES MAXIMUM IN
FIRST LEG HOLE ARRANGEMENT STYLEONE HOLE
SUBSTITUTES & CROSS-REFERENCES 1
MS9596-066Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy SAE-AS9596?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is SAE-AS9596?
SAE-AS9596 is a BRACKET,ANGLE.
What parts can replace SAE-AS9596?
There is 1 known substitute for SAE-AS9596: MS9596-066. Substitute compatibility should be verified for your specific system.
What is the NSN for SAE-AS9596?
SAE-AS9596 is cataloged in the U.S. Government catalog under NSN 5340-00-283-7546. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — SAE-AS9596

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.