PartsTable
Technical Data Sheet
PartsTable / O-RING / SAE-AS83461/2
SAE-AS83461/2 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The SAE-AS83461/2 is a the manufacturer industrial component. This product is currently in active production with full OEM support. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5331-00-322-2149, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
SAE-AS83461/2
NSN: 5331-00-322-2149
FSC: 5331 — O-RING
CAGE: 0U583 — SAE INTERNATIONAL DBA SAE INTERNATIONAL (USA)
SPECIFICATIONS
Part NumberSAE-AS83461/2
NSN5331-00-322-2149
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: SAE-AS83461/2 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
MATERIAL: RUBBER BUTADIENE-ACRYLONITRILE CLASS NBR
•
OUTSIDE DIAMETER: 0.356 INCHES MINIMUM AND 0.378 INCHES MAXIMUM IN
•
HARDNESS RATING: 75.0 SHORE DUROMETER A NOMINAL
•
CENTER HOLE DIAMETER: 0.234 INCHES MINIMUM AND 0.244 INCHES MAXIMUM IN
•
CROSS-SECTIONAL HEIGHT: 0.061 INCHES MINIMUM AND 0.071 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS (FLIS)
MATERIALRUBBER BUTADIENE-ACRYLONITRILE CLASS NBR
OUTSIDE DIAMETER0.356 INCHES MINIMUM AND 0.378 INCHES MAXIMUM IN
HARDNESS RATING75.0 SHORE DUROMETER A NOMINAL
CENTER HOLE DIAMETER0.234 INCHES MINIMUM AND 0.244 INCHES MAXIMUM IN
CROSS-SECTIONAL HEIGHT0.061 INCHES MINIMUM AND 0.071 INCHES MAXIMUM IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 31
AS568-906 MIL-P-83461Interchangeable
interchangeable cross-reference
interchangeable
3-906N168-80Interchangeable
interchangeable cross-reference
interchangeable
PL-999D0838 PC NO 19Interchangeable
interchangeable cross-reference
interchangeable
M83461/2-905Interchangeable
interchangeable cross-reference
interchangeable
M83461/1AInterchangeable
interchangeable cross-reference
interchangeable
AS568-910 MIL-P-83461Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy SAE-AS83461/2?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is SAE-AS83461/2?
SAE-AS83461/2 is a SAE-AS83461/2.
What parts can replace SAE-AS83461/2?
There are 31 known substitutes for SAE-AS83461/2: AS568-906 MIL-P-83461, 3-906N168-80, PL-999D0838 PC NO 19 and 28 more. Substitute compatibility should be verified for your specific system.
What is the NSN for SAE-AS83461/2?
SAE-AS83461/2 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5331-00-322-2149. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — SAE-AS83461/2

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026