PartsTable
Technical Data Sheet
Download PDF

SAE-AS27195 — GASKET

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

SAE-AS27195: GASKET.

The GASKET is a the manufacturer industrial component. Key specifications include material: ALUMINUM ALLOY 6061 RETAINER, temp_rating: -65.0 FAHRENHEIT AND 275.0 FAHRENHEIT DEGF, hole_diameter: 0.328 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN, overall_width: 4.000 INCHES NOMINAL IN, overall_length: 4.562 INCHES NOMINAL IN, hardness_rating: 70.0 SHORE DUROMETER A NOMINAL OVERALL. This part is cataloged in the U.S.

Government catalog under NSN 5330-00-719-7247, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
SAE-AS27195
NSN: 5330-00-719-7247
NIINs: 007197247, 008057704, 008066648, 008066649, 008343384, 010784511, 011076633, 011251261
FSC: 5330 — Packing and Gasket Materials
CAGE: 0U583 — SAE INTERNATIONAL DBA SAE INTERNATIONAL (USA)
SPECIFICATIONS
materialALUMINUM ALLOY 6061 RETAINER
temp_rating-65.0 FAHRENHEIT AND 275.0 FAHRENHEIT DEGF
hole_diameter0.328 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN
overall_width4.000 INCHES NOMINAL IN
overall_length4.562 INCHES NOMINAL IN
hardness_rating70.0 SHORE DUROMETER A NOMINAL OVERALL
special_featuresCONSTRUCTION: SOLID; PACKING INSIDE DIAMETER: 2.841 INCHES NOM.; RETAINER THICKNESS: 0.090 INCHES NOMINAL IN
style_designatorPOLYGON
aperture_diameter2.341 INCHES NOMINAL IN
surface_treatmentANODIZE RETAINER
bolt_hole_quantity6
gage_ring_thickness0.090 INCHES NOMINAL IN
NSN5330-00-719-7247
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: SAE-AS27195 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: MIL-A-8625 MIL SPEC SINGLE TREATMENT RESPONSE OVERALL
•
CROSS-SECTIONAL THICKNESS: 0.120 INCHES NOMINAL IN
•
GAGE RING THICKNESS: 0.080 INCHES NOMINAL IN
•
HARDNESS RATING: 70.0 SHORE DUROMETER A NOMINAL OVERALL
•
SIDE RADIUS FROM GASKET CENTER: 0.625 INCHES NOMINAL IN
•
STYLE DESIGNATOR: NON-CIRCULAR
•
MATERIAL DOCUMENT AND CLASSIFICATION: QQ-A-250/11 FED SPEC SINGLE MATERIAL RESPONSE OVERALL
•
CROSS-SECTIONAL SHAPE STYLE: METAL AND SYNTHETIC RUBBER
TECHNICAL CHARACTERISTICS
SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONMIL-A-8625 MIL SPEC SINGLE TREATMENT RESPONSE OVERALL
CROSS-SECTIONAL THICKNESS0.120 INCHES NOMINAL IN
GAGE RING THICKNESS0.080 INCHES NOMINAL IN
HARDNESS RATING70.0 SHORE DUROMETER A NOMINAL OVERALL
SIDE RADIUS FROM GASKET CENTER0.625 INCHES NOMINAL IN
STYLE DESIGNATORNON-CIRCULAR
MATERIAL DOCUMENT AND CLASSIFICATIONQQ-A-250/11 FED SPEC SINGLE MATERIAL RESPONSE OVERALL
CROSS-SECTIONAL SHAPE STYLEMETAL AND SYNTHETIC RUBBER
OVERALL WIDTH2.073 INCHES NOMINAL IN
OUTSIDE CORNER INVERTED RADIUS0.218 INCHES NOMINAL IN
SUBSTITUTES & CROSS-REFERENCES 1
MS27195-12Reference document
Same NSN cross-reference
Reference document — Design control — primary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy SAE-AS27195?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is SAE-AS27195?
SAE-AS27195 is a GASKET.
What parts can replace SAE-AS27195?
There is 1 known substitute for SAE-AS27195: MS27195-12. Substitute compatibility should be verified for your specific system.
What is the NSN for SAE-AS27195?
SAE-AS27195 is cataloged in the U.S. Government catalog under NSN 5330-00-719-7247. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — SAE-AS27195

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.