PartsTable
Technical Data Sheet
PartsTable / COMPONENT / SAE-AS21919WDG33
SAE-AS21919WDG33 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The CLAMP,LOOP is a the manufacturer industrial component. Key specifications include diameter: 0.204 INCHES NOMINAL IN, material: RUBBER SYNTHETIC CUSHION, overall_width: 0.500 INCHES NOMINAL IN, special_features: FURNISHED WITH WEDGE, style_designator: OFFSET MOUNT, tongue_hole_type: ROUND, UNTHREADED. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-200-3042, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
SAE-AS21919WDG33
NSN: 5340-00-200-3042
FSC: 5340
CAGE: 96906 — MILITARY STANDARDS PROMULGATED BY MILITARY DEPARTMENTS UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M
SPECIFICATIONS
diameter0.204 INCHES NOMINAL IN
materialRUBBER SYNTHETIC CUSHION
overall_width0.500 INCHES NOMINAL IN
special_featuresFURNISHED WITH WEDGE
style_designatorOFFSET MOUNT
tongue_hole_typeROUND, UNTHREADED
material_thickness0.058 INCHES MINIMUM AND 0.068 INCHES MAXIMUM IN
loop_inside_diameter2.047 INCHES MINIMUM AND 2.077 INCHES MAXIMUM IN
material_document_and_classificationQQ-A-362,O FED SPEC SINGLE MATERIAL RESPONSE BAND
distance_from_loop_center_to_tongue_end1.749 INCHES NOMINAL IN
center_to_center_distance_between_loop_and_mounting_hole1.531 INCHES NOMINAL IN
NSN5340-00-200-3042
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: SAE-AS21919WDG33 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
MATERIAL THICKNESS: 0.058 INCHES MINIMUM AND 0.068 INCHES MAXIMUM IN
•
MATERIAL DOCUMENT AND CLASSIFICATION: QQ-A-362,O FED SPEC SINGLE MATERIAL RESPONSE BAND
•
MATERIAL: RUBBER SYNTHETIC CUSHION
•
STYLE DESIGNATOR: OFFSET MOUNT
•
DISTANCE FROM LOOP CENTER TO TONGUE END: 1.749 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS (FLIS)
MATERIAL THICKNESS0.058 INCHES MINIMUM AND 0.068 INCHES MAXIMUM IN
MATERIAL DOCUMENT AND CLASSIFICATIONQQ-A-362,O FED SPEC SINGLE MATERIAL RESPONSE BAND
MATERIALRUBBER SYNTHETIC CUSHION
STYLE DESIGNATOROFFSET MOUNT
MATERIALRUBBER SYNTHETIC CUSHION
MATERIALALUMINUM ALLOY 2024 BAND
DISTANCE FROM LOOP CENTER TO TONGUE END1.749 INCHES NOMINAL IN
DISTANCE FROM LOOP CENTER TO TONGUE END1.749 INCHES NOMINAL IN
DIAMETER0.204 INCHES NOMINAL IN
OVERALL WIDTH0.500 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 13
MIL-DTL-8603Upgraded Successor
successor cross-reference
successor
TA1716WS4Upgraded Successor
successor cross-reference
successor
MS21919WG4Upgraded Successor
successor cross-reference
successor
10335339Upgraded Successor
successor cross-reference
successor
AS21919WCG03Upgraded Successor
successor cross-reference
successor
AS21919Upgraded Successor
successor cross-reference
successor
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy SAE-AS21919WDG33?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is SAE-AS21919WDG33?
SAE-AS21919WDG33 is a CLAMP,LOOP.
What parts can replace SAE-AS21919WDG33?
There are 13 known substitutes for SAE-AS21919WDG33: MIL-DTL-8603, TA1716WS4, MS21919WG4 and 10 more. Substitute compatibility should be verified for your specific system.
What is the NSN for SAE-AS21919WDG33?
SAE-AS21919WDG33 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-200-3042. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — SAE-AS21919WDG33

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026