SAE-AS1553 — CLAMP,LOOP

✓ Government record, cited

— · ORING SEAL

PRODUCT OVERVIEW

SAE-AS1553: CLAMP,LOOP.

The CLAMP,LOOP is a the manufacturer industrial component. Key specifications include material: STEEL OVERALL, overall_width: 12.30 INCHES NOMINAL IN, special_features: CUSHIONED LOOP;FASTENER HOLE DIA IS 0.199 IN (MIN) AND 0.209 IN (MAX) IN, style_designator: SINGLE LOOP, material_diameter: 0.59 INCHES NOMINAL IN, material_thickness: 0.59 INCHES NOMINAL IN. This part is cataloged in the U.S.

Government catalog under NSN 5340-00-515-1375, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS

SAE-AS1553

NSN: 5340-00-515-1375
NIINs: 005151375, 005272096, 006371886, 015780289, 015912579, 015912580, 015912583, 015912586, 016090269, 016220277, 016229204
FSC: 5340 — Hardware, Commercial
CAGE: 0U583 — SAE INTERNATIONAL DBA SAE INTERNATIONAL (USA)

SPECIFICATIONS

material	STEEL OVERALL
overall_width	12.30 INCHES NOMINAL IN
special_features	CUSHIONED LOOP;FASTENER HOLE DIA IS 0.199 IN (MIN) AND 0.209 IN (MAX) IN
style_designator	SINGLE LOOP
material_diameter	0.59 INCHES NOMINAL IN
material_thickness	0.59 INCHES NOMINAL IN
loop_inside_diameter	1.50 INCHES NOMINAL IN
distance_from_loop_center_to_tongue_end	1.240 INCHES NOMINAL IN
part_name_assigned_by_controlling_agency	CLAMP,LOOP
center_to_center_distance_between_first_and_second_holes	6.60 INCHES NOMINAL IN
center_to_center_distance_between_loop_and_mounting_hole	15.88 INCHES NOMINAL IN
NSN	5340-00-515-1375

COMPONENT DIAGRAM

KEY FEATURES

•

STYLE DESIGNATOR: SINGLE LOOP

•

MATERIAL DOCUMENT AND CLASSIFICATION: AMS 5510 ASSN STD SINGLE MATERIAL RESPONSE BAND

•

DIAMETER: 0.199 INCHES MINIMUM AND 0.209 INCHES MAXIMUM IN

•

MATERIAL THICKNESS: 0.026 INCHES MINIMUM AND 0.036 INCHES MAXIMUM IN

•

DISTANCE FROM LOOP CENTER TO TONGUE END: 0.732 INCHES MINIMUM AND 0.762 INCHES MAXIMUM IN

•

TONGUE HOLE TYPE: ROUND, UNTHREADED

•

CENTER TO CENTER DISTANCE BETWEEN LOOP AND MOUNTING HOLE: 0.519 INCHES MINIMUM AND 0.539 INCHES MAXIMUM IN

TECHNICAL CHARACTERISTICS

STYLE DESIGNATOR	SINGLE LOOP
MATERIAL DOCUMENT AND CLASSIFICATION	AMS 5510 ASSN STD SINGLE MATERIAL RESPONSE BAND
DIAMETER	0.199 INCHES MINIMUM AND 0.209 INCHES MAXIMUM IN
OVERALL WIDTH	0.484 INCHES MINIMUM AND 0.516 INCHES MAXIMUM IN
MATERIAL THICKNESS	0.026 INCHES MINIMUM AND 0.036 INCHES MAXIMUM IN
DISTANCE FROM LOOP CENTER TO TONGUE END	0.732 INCHES MINIMUM AND 0.762 INCHES MAXIMUM IN
TONGUE HOLE TYPE	ROUND, UNTHREADED
CENTER TO CENTER DISTANCE BETWEEN LOOP AND MOUNTING HOLE	0.519 INCHES MINIMUM AND 0.539 INCHES MAXIMUM IN
MATERIAL	STEEL COMP 321 BAND
MATERIAL	STEEL CUSHION

SUBSTITUTES & CROSS-REFERENCES 8

535D6Reference document

Same NSN cross-reference