PartsTable
Technical Data Sheet
Download PDF

SAE-AS14101 — BEARING,PLAIN,SELF-ALIGNING

✓ Government record, cited
— · BALL BEARING
PRODUCT OVERVIEW

SAE-AS14101: BEARING,PLAIN,SELF-ALIGNING.

The BEARING,PLAIN,SELF-ALIGNING is a the manufacturer industrial component. Key specifications include material: STEEL COMP 630 OUTER RING, bore_diameter: 0.4370 INCHES MINIMUM AND 0.4375 INCHES MAXIMUM IN, style_designator: WITH INSERT AND/OR LINER WITH STAKING GROOVE, inner_member_width: 0.3730 INCHES MINIMUM AND 0.3750 INCHES MAXIMUM IN, outer_member_width: 0.2760 INCHES MINIMUM AND 0.2860 INCHES MAXIMUM IN, end_item_identification: F-35 AIRCRAFT. This part is cataloged in the U.S.

Government catalog under NSN 3120-01-492-6759, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
SAE-AS14101
NSN: 3120-01-492-6759
NIINs: 014926759, 016175499, 016291655, 016291656, 016718625
FSC: 3120 — Bearings, Plain, Unmounted
CAGE: 96906 — MILITARY STANDARDS PROMULGATED BY MILITARY DEPARTMENTS UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M
SPECIFICATIONS
materialSTEEL COMP 630 OUTER RING
bore_diameter0.4370 INCHES MINIMUM AND 0.4375 INCHES MAXIMUM IN
style_designatorWITH INSERT AND/OR LINER WITH STAKING GROOVE
inner_member_width0.3730 INCHES MINIMUM AND 0.3750 INCHES MAXIMUM IN
outer_member_width0.2760 INCHES MINIMUM AND 0.2860 INCHES MAXIMUM IN
end_item_identificationF-35 AIRCRAFT
static_radial_load_rating8750 POUNDS LBS
outer_member_outside_diameter0.7495 INCHES MINIMUM AND 0.7500 INCHES MAXIMUM IN
part_name_assigned_by_controlling_agencyBEARING,PLAIN,SELF LUBRICATING
NSN3120-01-492-6759
COMPONENT DIAGRAM
BALL BEARING — SEAL TYPE DETERMINES MAINTENANCE OD: — · BORE: — · WIDTH: — SEAL: Open · PN: SAE-AS14101 · OEM ⚠ VERIFY BEFORE ORDERING ABEC grade: higher = tighter tolerance = higher cost. ABEC-1 is standard, ABEC-7+ for precision spindles. Open, shielded (ZZ), and sealed (2RS) versions have different max RPM ratings ✓ BROKER TIP 2RS = sealed for life (no maintenance). ZZ = shielded, re-greaseable. Open = must lubricate on install. Common interchange: 6205-2RS = 6205-2RSR = 6205-DDU (same bearing, different suffix) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
INNER MEMBER WIDTH: 0.6250 INCHES NOMINAL IN
•
OUTER MEMBER WIDTH: 0.6230 INCHES MINIMUM AND 0.6250 INCHES MAXIMUM IN
•
STYLE DESIGNATOR: WITHOUT INSERT OR LINER WITH STAKING GROOVE
•
BORE DIAMETER: 0.6240 INCHES MINIMUM AND 0.6250 INCHES MAXIMUM IN
•
MATERIAL: STEEL CORROSION RESISTING OVERALL
•
OUTER MEMBER OUTSIDE DIAMETER: 1.1870 INCHES MINIMUM AND 1.1875 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS
INNER MEMBER WIDTH0.6250 INCHES NOMINAL IN
OUTER MEMBER WIDTH0.6230 INCHES MINIMUM AND 0.6250 INCHES MAXIMUM IN
STYLE DESIGNATORWITHOUT INSERT OR LINER WITH STAKING GROOVE
SPECIAL FEATURESSELF-LUBRICATING, SELF ALIGNING, LOW SPEED, NARROW GROVED OUTER RING
END ITEM IDENTIFICATIONMK 105,MOD 4,NACHELLE LIFT MECHANISM
BORE DIAMETER0.6240 INCHES MINIMUM AND 0.6250 INCHES MAXIMUM IN
MATERIALSTEEL CORROSION RESISTING OVERALL
OUTER MEMBER OUTSIDE DIAMETER1.1870 INCHES MINIMUM AND 1.1875 INCHES MAXIMUM IN
SUBSTITUTES & CROSS-REFERENCES 2
SAE-AS-14101-10CReference document
Same NSN cross-reference
Reference document — Secondary reference
SAE-AS81820Reference document
Same NSN cross-reference
Reference document — Design control — primary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy SAE-AS14101?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is SAE-AS14101?
SAE-AS14101 is a BEARING,PLAIN,SELF-ALIGNING.
What parts can replace SAE-AS14101?
There are 2 known substitutes for SAE-AS14101: SAE-AS-14101-10C, SAE-AS81820. Substitute compatibility should be verified for your specific system.
What is the NSN for SAE-AS14101?
SAE-AS14101 is cataloged in the U.S. Government catalog under NSN 3120-01-492-6759. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — SAE-AS14101