PartsTable
Technical Data Sheet
Download PDF

SAE-AS1037HW0505V — ADAPTER,STRAIGHT,TUBE TO BOSS

✓ Government record, cited
— · HOSE FITTING
PRODUCT OVERVIEW

SAE-AS1037HW0505V: ADAPTER,STRAIGHT,TUBE TO BOSS.

The ADAPTER,STRAIGHT,TUBE TO BOSS is a the manufacturer industrial component. Key specifications include material: ALUMINUM ALLOY 7075 OVERALL, seat_angle: 110.0 DEGREES ALL ENDS, thread_class: 3A ALL ENDS A, connection_type: THREADED EXTERNAL TUBE ALL ENDS, style_designator: FLARED W/ BULKHEAD THREAD, surface_treatment: ANODIZE AND ALUMINUM OVERALL. This part is cataloged in the U.S.

Government catalog under NSN 4730-01-695-9774, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
SAE-AS1037HW0505V
NSN: 4730-01-695-9774
FSC: 4730 — Hose, Pipe, Tube, Lubrication, and Railing Fittings
CAGE: 0U583 — SAE INTERNATIONAL DBA SAE INTERNATIONAL (USA)
SPECIFICATIONS
materialALUMINUM ALLOY 7075 OVERALL
seat_angle110.0 DEGREES ALL ENDS
thread_class3A ALL ENDS A
connection_typeTHREADED EXTERNAL TUBE ALL ENDS
style_designatorFLARED W/ BULKHEAD THREAD
surface_treatmentANODIZE AND ALUMINUM OVERALL
nominal_thread_size0.5000 INCHES ALL ENDS IN
nominal_overall_length1.766 INCHES IN
thread_tolerance_class3 INTERNAL ALL ENDS
end_item_identificationSPECIAL, AIR VEHICLE, AIRCRAFT
thread_quantity_per_inch20 ALL ENDS
thread_series_designatorUNIFIED NATIONAL JOINT FINE (UNJF) ALL ENDS
NSN4730-01-695-9774
COMPONENT DIAGRAM
HOSE FITTING — THREAD TYPE IS CRITICAL END A: — STRAIGHT END B: — SPECIFICATIONS Thread: — Material: — Pressure: — PN: SAE-AS1037HW0505V · OEM ⚠ VERIFY BEFORE ORDERING NPT ≠ BSPT — tapered threads look identical but are NOT interchangeable. Wrong thread = leak. JIC (37°) ≠ AN (37°) ≠ SAE 45° — flare angles must match exactly. Measure thread pitch with gauge — visual identification is unreliable ✓ BROKER TIP Always use thread sealant (PTFE tape or pipe compound) on tapered threads (NPT/BSPT). JIC/AN flare fittings seal metal-to-metal — never use tape on flare connections PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
THREAD TOLERANCE CLASS: 3 INTERNAL ALL ENDS
•
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: BAMS2472 NATIONAL STD/SPEC SINGLE TREATMENT RESPONSE AND AS1037 NATIONAL STD/SPEC 2ND TREATMENT RESPONSE OVERALL
•
NOMINAL OVERALL LENGTH: 1.766 INCHES IN
•
CONNECTION TYPE: THREADED EXTERNAL TUBE ALL ENDS
•
STYLE DESIGNATOR: FLARED W/ BULKHEAD THREAD
•
MATERIAL DOCUMENT AND CLASSIFICATION: AMS-QQ-A-225/9 NATIONAL STD/SPEC SINGLE MATERIAL RESPONSE OVERALL
•
NOMINAL OUTSIDE DIAMETER TUBE ACCOMMODATED: 0.312 INCHES ALL ENDS IN
•
NOMINAL THREAD SIZE: 0.5000 INCHES ALL ENDS IN
TECHNICAL CHARACTERISTICS
THREAD TOLERANCE CLASS3 INTERNAL ALL ENDS
SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONBAMS2472 NATIONAL STD/SPEC SINGLE TREATMENT RESPONSE AND AS1037 NATIONAL STD/SPEC 2ND TREATMENT RESPONSE OVERALL
NOMINAL OVERALL LENGTH1.766 INCHES IN
CONNECTION TYPETHREADED EXTERNAL TUBE ALL ENDS
STYLE DESIGNATORFLARED W/ BULKHEAD THREAD
MATERIAL DOCUMENT AND CLASSIFICATIONAMS-QQ-A-225/9 NATIONAL STD/SPEC SINGLE MATERIAL RESPONSE OVERALL
NOMINAL OUTSIDE DIAMETER TUBE ACCOMMODATED0.312 INCHES ALL ENDS IN
NOMINAL THREAD SIZE0.5000 INCHES ALL ENDS IN
SEAT ANGLE110.0 DEGREES ALL ENDS
SPECIFICATION/STANDARD DATA0U583 AS1037 PROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD
SUBSTITUTES & CROSS-REFERENCES 4
SAE-AS4841Reference document
Same NSN cross-reference
Reference document — Design control — primary reference
SAE-AS1037Reference document
Same NSN cross-reference
Reference document — Secondary reference
AS1037HW0505VReference document
Same NSN cross-reference
Reference document — Design control — primary reference
AS4396Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy SAE-AS1037HW0505V?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is SAE-AS1037HW0505V?
SAE-AS1037HW0505V is a ADAPTER,STRAIGHT,TUBE TO BOSS.
What parts can replace SAE-AS1037HW0505V?
There are 4 known substitutes for SAE-AS1037HW0505V: SAE-AS4841, SAE-AS1037, AS1037HW0505V and 1 more. Substitute compatibility should be verified for your specific system.
What is the NSN for SAE-AS1037HW0505V?
SAE-AS1037HW0505V is cataloged in the U.S. Government catalog under NSN 4730-01-695-9774. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — SAE-AS1037HW0505V

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.