PartsTable
Technical Data Sheet

SAE-AMS-DTL-23053/4 — INSULATION SLEEVING,ELECTRICAL

✓ Government record, cited
— · COMPONENT
PRODUCT OVERVIEW

SAE-AMS-DTL-23053/4: INSULATION SLEEVING,ELECTRICAL.

The INSULATION SLEEVING,ELECTRICAL is a the manufacturer industrial component. Key specifications include markings: ANY ACCEPTABLE, material: PLASTIC POLYOLEFIN, design_form: FULL ROUND, flexibility: FLEXIBLE, temp_rating: -55.0 CELSIUS AND 110.0 CELSIUS DEGC, overall_length: 36.000 INCHES NOMINAL IN. This part is cataloged in the U.S.

Government catalog under NSN 5970-01-591-7217, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
SAE-AMS-DTL-23053/4
NSN: 5970-01-591-7217
NIINs: 015917217, 016146667
FSC: 5970 — Electrical Insulators and Insulating Materials
CAGE: 81343 — SOCIETY OF AUTOMOTIVE ENGINEERS INC (USA)
SPECIFICATIONS
markingsANY ACCEPTABLE
materialPLASTIC POLYOLEFIN
design_formFULL ROUND
flexibilityFLEXIBLE
temp_rating-55.0 CELSIUS AND 110.0 CELSIUS DEGC
overall_length36.000 INCHES NOMINAL IN
special_featuresMELTABLE INNER WALL, 0.030 IN. THICK IN
style_designatorSHRINKABLE
reliability_indicatorNOT ESTABLISHED
environmental_protectionCORROSION RESISTANT AND FLAME RESISTANT AND MILDEW RESISTANT AND WATER RESISTANT
expanded_inside_diameter0.355 INCHES NOMINAL IN
minimum_tensile_strength1500 POUNDS PER SQUARE INCH LBS
NSN5970-01-591-7217
COMPONENT DIAGRAM
COMPONENT MAIN IC EDGE CONNECTOR No detailed specs available INSULATION SLEEVING,ELECTRICAL TITLE COMPONENT PN SAE-AMS-DTL-23053/4 MFR INSULATION SLEEVING,EL
KEY FEATURES
•
TEMP RATING: -55.0 CELSIUS AND 110.0 CELSIUS DEGC
•
EXPANDED INSIDE DIAMETER: 0.470 INCHES MINIMUM IN
•
DESIGN FORM: FULL ROUND
•
MARKINGS: ANY ACCEPTABLE
•
STYLE DESIGNATOR: SHRINKABLE
•
FLEXIBILITY: FLEXIBLE
•
RECOVERED WALL THICKNESS: 0.056 INCHES MINIMUM AND 0.084 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS
TEMP RATING-55.0 CELSIUS AND 110.0 CELSIUS DEGC
EXPANDED INSIDE DIAMETER0.470 INCHES MINIMUM IN
DESIGN FORMFULL ROUND
MARKINGSANY ACCEPTABLE
STYLE DESIGNATORSHRINKABLE
FLEXIBILITYFLEXIBLE
OVERALL LENGTH36.000 INCHES NOMINAL IN
RECOVERED WALL THICKNESS0.056 INCHES MINIMUM AND 0.084 INCHES MAXIMUM IN
RECOVERED INSIDE DIAMETER0.160 INCHES MAXIMUM IN
HEAT SHRINKAGE RATING IN PERCENT66.0
SUBSTITUTES & CROSS-REFERENCES 2
M23053/4-303-2Reference document
Same NSN cross-reference
Reference document — Design control — primary reference
SAE-AS23053/4Reference document
Same NSN cross-reference
Reference document — Design control — primary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Shelf-life managedAcquisition advice: Insurance item — stocked against contingency demandNo demilitarization required
Ready to buy SAE-AMS-DTL-23053/4?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is SAE-AMS-DTL-23053/4?
SAE-AMS-DTL-23053/4 is a INSULATION SLEEVING,ELECTRICAL.
What parts can replace SAE-AMS-DTL-23053/4?
There are 2 known substitutes for SAE-AMS-DTL-23053/4: M23053/4-303-2, SAE-AS23053/4. Substitute compatibility should be verified for your specific system.
What is the NSN for SAE-AMS-DTL-23053/4?
SAE-AMS-DTL-23053/4 is cataloged in the U.S. Government catalog under NSN 5970-01-591-7217. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — SAE-AMS-DTL-23053/4