PartsTable
Technical Data Sheet
PartsTable / COMPONENT / SAE J518-1 32 1161C
SAE J518-1 32 1161C ✓ Verified by PartsTable
— · HOSE FITTING
WHAT YOU NEED TO KNOW
PTFE tape on tapered threads (NPT/BSPT) JIC/AN flare connections seal metal-to-metal — no tape
NPT != BSPT — look identical, NOT interchangeable
PRODUCT OVERVIEW

The FLANGE,PIPE is a the manufacturer industrial component. Key specifications include material: STEEL, thickness: 1.030 INCHES NOMINAL IN, flange_width: 3.720 INCHES NOMINAL IN, recess_depth: 0.350 INCHES MINIMUM AND 0.360 INCHES MAXIMUM IN, flange_length: 3.940 INCHES MINIMUM AND 4.060 INCHES MAXIMUM IN, recess_diameter: 2.834 INCHES MINIMUM AND 2.854 INCHES MAXIMUM IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 4730-01-540-5679, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
SAE J518-1 32 1161C
NSN: 4730-01-540-5679
FSC: 4730
CAGE: 0U583 — SAE INTERNATIONAL DBA SAE INTERNATIONAL (USA)
SPECIFICATIONS
materialSTEEL
thickness1.030 INCHES NOMINAL IN
flange_width3.720 INCHES NOMINAL IN
recess_depth0.350 INCHES MINIMUM AND 0.360 INCHES MAXIMUM IN
flange_length3.940 INCHES MINIMUM AND 4.060 INCHES MAXIMUM IN
recess_diameter2.834 INCHES MINIMUM AND 2.854 INCHES MAXIMUM IN
style_designatorBOLT HOLE CONNECTOR PLATE
bolt_hole_diameter0.521 INCHES MINIMUM AND 0.541 INCHES MAXIMUM IN
flange_section_styleRAISED FACED, DISHED
end_item_identificationEND ITEM NSN: 5420-00-889-2020
nondefinitive_spec/std_data4 FIGURE AND 1A TABLE A
specification/standard_data81343 - J518 PROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD
NSN4730-01-540-5679
COMPONENT DIAGRAM
HOSE FITTING — THREAD TYPE IS CRITICAL END A: — STRAIGHT END B: — SPECIFICATIONS Thread: — Material: — Pressure: — PN: SAE J518-1 32 1161C · OEM ⚠ VERIFY BEFORE ORDERING NPT ≠ BSPT — tapered threads look identical but are NOT interchangeable. Wrong thread = leak. JIC (37°) ≠ AN (37°) ≠ SAE 45° — flare angles must match exactly. Measure thread pitch with gauge — visual identification is unreliable ✓ BROKER TIP Always use thread sealant (PTFE tape or pipe compound) on tapered threads (NPT/BSPT). JIC/AN flare fittings seal metal-to-metal — never use tape on flare connections PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
OUTSIDE EDGE TO BOLT HOLE CENTER DISTANCE ALONG WIDTH: 0.810 INCHES NOMINAL IN
•
RECESS DEPTH: 0.350 INCHES MINIMUM AND 0.360 INCHES MAXIMUM IN
•
FLANGE WIDTH: 3.720 INCHES NOMINAL IN
•
FLANGE SECTION STYLE: RAISED FACED, DISHED
•
MATERIAL: STEEL
•
THICKNESS: 1.030 INCHES NOMINAL IN
•
SPECIFICATION/STANDARD DATA: 81343 - J518 PROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD
•
FLANGE LENGTH: 3.940 INCHES MINIMUM AND 4.060 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS (FLIS)
OUTSIDE EDGE TO BOLT HOLE CENTER DISTANCE ALONG WIDTH0.810 INCHES NOMINAL IN
RECESS DEPTH0.350 INCHES MINIMUM AND 0.360 INCHES MAXIMUM IN
FLANGE WIDTH3.720 INCHES NOMINAL IN
FLANGE SECTION STYLERAISED FACED, DISHED
MATERIALSTEEL
THICKNESS1.030 INCHES NOMINAL IN
SPECIFICATION/STANDARD DATA81343 - J518 PROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD
FLANGE LENGTH3.940 INCHES MINIMUM AND 4.060 INCHES MAXIMUM IN
END ITEM IDENTIFICATIONEND ITEM NSN: 5420-00-889-2020
CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG LENGTH3.052 INCHES MINIMUM AND 3.072 INCHES MAXIMUM IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 13
3070AS574-1Interchangeable
interchangeable cross-reference
interchangeable
SAE J518-8 110161Interchangeable
interchangeable cross-reference
interchangeable
3070AS574Interchangeable
interchangeable cross-reference
interchangeable
849-09679-000Interchangeable
interchangeable cross-reference
interchangeable
699-D-8164 REV 4Interchangeable
interchangeable cross-reference
interchangeable
J518Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy SAE J518-1 32 1161C?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is SAE J518-1 32 1161C?
SAE J518-1 32 1161C is a FLANGE,PIPE.
What parts can replace SAE J518-1 32 1161C?
There are 13 known substitutes for SAE J518-1 32 1161C: 3070AS574-1, SAE J518-8 110161, 3070AS574 and 10 more. Substitute compatibility should be verified for your specific system.
What is the NSN for SAE J518-1 32 1161C?
SAE J518-1 32 1161C is cataloged in the Federal Logistics Information System (FLIS) under NSN 4730-01-540-5679. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — SAE J518-1 32 1161C

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026