PartsTable
Technical Data Sheet
PartsTable / O-RING / SAE AS83461/1
SAE AS83461/1 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The SAE AS83461/1 is a the manufacturer industrial component. This product is currently in active production with full OEM support. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5331-01-478-8486, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
SAE AS83461/1
NSN: 5331-01-478-8486
FSC: 5331 — O-RING
CAGE: 0U583 — SAE INTERNATIONAL DBA SAE INTERNATIONAL (USA)
SPECIFICATIONS
Part NumberSAE AS83461/1
NSN5331-01-478-8486
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: SAE AS83461/1 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
HARDNESS RATING: 75.0 SHORE DUROMETER A NOMINAL
•
TEMP RATING: -65.0 FAHRENHEIT AND 275.0 FAHRENHEIT DEGF
•
DEPARTURE FROM CITED DOCUMENT: CLEANING, PACKAGING, AND MARKING IAW MIL-STD-1330D.
•
CENTER HOLE DIAMETER: 0.419 INCHES MINIMUM AND 0.429 INCHES MAXIMUM IN
•
MATERIAL: RUBBER BUTADIENE-ACRYLONITRILE CLASS NBR
•
CROSS-SECTIONAL HEIGHT: 0.100 INCHES MINIMUM AND 0.106 INCHES MAXIMUM IN
•
MATERIAL DOCUMENT AND CLASSIFICATION: MIL-P-83461 MIL SPEC SINGLE MATERIAL RESPONSE
•
CRITICALITY CODE JUSTIFICATION: ZZZW
TECHNICAL CHARACTERISTICS (FLIS)
HARDNESS RATING75.0 SHORE DUROMETER A NOMINAL
TEMP RATING-65.0 FAHRENHEIT AND 275.0 FAHRENHEIT DEGF
DEPARTURE FROM CITED DOCUMENTCLEANING, PACKAGING, AND MARKING IAW MIL-STD-1330D.
CENTER HOLE DIAMETER0.419 INCHES MINIMUM AND 0.429 INCHES MAXIMUM IN
MATERIALRUBBER BUTADIENE-ACRYLONITRILE CLASS NBR
CROSS-SECTIONAL HEIGHT0.100 INCHES MINIMUM AND 0.106 INCHES MAXIMUM IN
MATERIAL DOCUMENT AND CLASSIFICATIONMIL-P-83461 MIL SPEC SINGLE MATERIAL RESPONSE
CRITICALITY CODE JUSTIFICATIONZZZW
VERIFIED SUBSTITUTES & CROSS-REFERENCES 12
M83461/1-111Interchangeable
interchangeable cross-reference
interchangeable
GHN10089-18Interchangeable
interchangeable cross-reference
interchangeable
AMS-P-83461/1Interchangeable
interchangeable cross-reference
interchangeable
2-134N304-75Interchangeable
interchangeable cross-reference
interchangeable
803-1385714-6-4Interchangeable
interchangeable cross-reference
interchangeable
MIL-P-83461/1-134Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy SAE AS83461/1?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is SAE AS83461/1?
SAE AS83461/1 is a SAE AS83461/1.
What parts can replace SAE AS83461/1?
There are 12 known substitutes for SAE AS83461/1: M83461/1-111, GHN10089-18, AMS-P-83461/1 and 9 more. Substitute compatibility should be verified for your specific system.
What is the NSN for SAE AS83461/1?
SAE AS83461/1 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5331-01-478-8486. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — SAE AS83461/1

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026