PartsTable
Technical Data Sheet
PartsTable / O-RING / SAE AMS-R-7362
SAE AMS-R-7362 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The O-RING is a the manufacturer industrial component. Key specifications include material: RUBBER BUTADIENE-ACRYLONITRILE CLASS NBR, hardness_rating: 70.0 SHORE DUROMETER A NOMINAL, outside_diameter: 16.505 INCHES NOMINAL IN, center_hole_diameter: 15.880 INCHES MINIMUM AND 16.030 INCHES MAXIMUM IN, elongation_percentage: 250 MAXIMUM, cross-sectional_height: 0.269 INCHES MINIMUM AND 0.281 INCHES MAXIMUM IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5331-01-135-7289, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
SAE AMS-R-7362
NSN: 5331-01-135-7289
FSC: 5331 — O-RING
CAGE: 0U583 — SAE INTERNATIONAL DBA SAE INTERNATIONAL (USA)
SPECIFICATIONS
materialRUBBER BUTADIENE-ACRYLONITRILE CLASS NBR
hardness_rating70.0 SHORE DUROMETER A NOMINAL
outside_diameter16.505 INCHES NOMINAL IN
center_hole_diameter15.880 INCHES MINIMUM AND 16.030 INCHES MAXIMUM IN
elongation_percentage250 MAXIMUM
cross-sectional_height0.269 INCHES MINIMUM AND 0.281 INCHES MAXIMUM IN
NSN5331-01-135-7289
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: SAE AMS-R-7362 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
MATERIAL: RUBBER BUTADIENE-ACRYLONITRILE CLASS NBR
•
ELONGATION PERCENTAGE: 250 MAXIMUM
•
CROSS-SECTIONAL HEIGHT: 0.269 INCHES MINIMUM AND 0.281 INCHES MAXIMUM IN
•
OUTSIDE DIAMETER: 16.505 INCHES NOMINAL IN
•
CENTER HOLE DIAMETER: 15.880 INCHES MINIMUM AND 16.030 INCHES MAXIMUM IN
•
HARDNESS RATING: 70.0 SHORE DUROMETER A NOMINAL
TECHNICAL CHARACTERISTICS (FLIS)
MATERIALRUBBER BUTADIENE-ACRYLONITRILE CLASS NBR
ELONGATION PERCENTAGE250 MAXIMUM
CROSS-SECTIONAL HEIGHT0.269 INCHES MINIMUM AND 0.281 INCHES MAXIMUM IN
OUTSIDE DIAMETER16.505 INCHES NOMINAL IN
CENTER HOLE DIAMETER15.880 INCHES MINIMUM AND 16.030 INCHES MAXIMUM IN
HARDNESS RATING70.0 SHORE DUROMETER A NOMINAL
VERIFIED SUBSTITUTES & CROSS-REFERENCES 27
2-003 C1124-70Interchangeable
interchangeable cross-reference
interchangeable
2-003 N674-7Interchangeable
interchangeable cross-reference
interchangeable
AS568-006MILG23652TY2Interchangeable
interchangeable cross-reference
interchangeable
SAE-AS568Interchangeable
interchangeable cross-reference
interchangeable
4400596-0060Interchangeable
interchangeable cross-reference
interchangeable
MIL-DTL-22050Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy SAE AMS-R-7362?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is SAE AMS-R-7362?
SAE AMS-R-7362 is a O-RING.
What parts can replace SAE AMS-R-7362?
There are 27 known substitutes for SAE AMS-R-7362: 2-003 C1124-70, 2-003 N674-7, AS568-006MILG23652TY2 and 24 more. Substitute compatibility should be verified for your specific system.
What is the NSN for SAE AMS-R-7362?
SAE AMS-R-7362 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5331-01-135-7289. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — SAE AMS-R-7362

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026