PartsTable
Technical Data Sheet
Download PDF

SAE 30R7-5 — HOSE,NONMETALLIC

✓ Government record, cited
— · PIPE SECTION
PRODUCT OVERVIEW

SAE 30R7-5: HOSE,NONMETALLIC.

The HOSE,NONMETALLIC is a the manufacturer industrial component. Key specifications include material: RUBBER SYNTHETIC TUBE, temp_rating: -29.0 FAHRENHEIT AND 257.0 FAHRENHEIT SINGLE RESPONSE DEGF, inside_diameter: 0.312 INCHES NOMINAL IN, outside_diameter: 0.562 INCHES NOMINAL IN, special_features: SAE STANDARD FOR "LOW-PRESSURE UNCOUPLED SYNTHETIC RUBBER COVERED HOSE", operating_pressure: 50.0 POUNDS PER SQUARE INCH (PSI) MAXIMUM SINGLE RESPONSE LBS. This part is cataloged in the U.S.

Government catalog under NSN 4720-01-499-3769, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
SAE 30R7-5
NSN: 4720-01-499-3769
FSC: 4720 — Hose and Flexible Tubing
CAGE: 0U583 — SAE INTERNATIONAL DBA SAE INTERNATIONAL (USA)
SPECIFICATIONS
materialRUBBER SYNTHETIC TUBE
temp_rating-29.0 FAHRENHEIT AND 257.0 FAHRENHEIT SINGLE RESPONSE DEGF
inside_diameter0.312 INCHES NOMINAL IN
outside_diameter0.562 INCHES NOMINAL IN
special_featuresSAE STANDARD FOR "LOW-PRESSURE UNCOUPLED SYNTHETIC RUBBER COVERED HOSE"
operating_pressure50.0 POUNDS PER SQUARE INCH (PSI) MAXIMUM SINGLE RESPONSE LBS
burst_test_pressure250.0 POUNDS PER SQUARE INCH SINGLE RESPONSE LBS
end_item_identificationINTERIM ARMORED VEHICLE (IAV), CONTRACTOR LOGISTICS SUPPORT (CLS).
inside_surface_conditionSMOOTH
media_for_which_designedFUEL/OIL, HYDROCARBON SINGLE RESPONSE
cross-sectional_shape_styleROUND
nondefinitive_spec/std_data6 SECTION
NSN4720-01-499-3769
COMPONENT DIAGRAM
PIPE SECTION — SCHEDULE = WALL THICKNESS WALL: — OD: — LENGTH: — — — PN: SAE 30R7-5 · OEM ⚠ VERIFY BEFORE ORDERING Schedule = wall thickness, NOT pipe diameter. Sch 40 and Sch 80 have the same OD but different wall thickness. Nominal pipe size ≠ actual OD — a 1" pipe is actually 1.315" OD ✓ BROKER TIP Sch 40 = standard wall, Sch 80 = heavy wall (higher pressure), Sch 160 = extra heavy. Seamless pipe is required for high-pressure applications — welded pipe has lower ratings PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
TEMP RATING: -29.0 FAHRENHEIT AND 257.0 FAHRENHEIT SINGLE RESPONSE DEGF
•
CROSS-SECTIONAL SHAPE STYLE: ROUND
•
OUTSIDE DIAMETER: 0.562 INCHES NOMINAL IN
•
OPERATING PRESSURE: 50.0 POUNDS PER SQUARE INCH (PSI) MAXIMUM SINGLE RESPONSE LBS
•
SPECIFICATION/STANDARD DATA: 81343-SAE J30 PROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD
•
NONDEFINITIVE SPEC/STD DATA: 6 SECTION
•
INSIDE DIAMETER: 0.312 INCHES NOMINAL IN
•
INSIDE SURFACE CONDITION: SMOOTH
TECHNICAL CHARACTERISTICS
TEMP RATING-29.0 FAHRENHEIT AND 257.0 FAHRENHEIT SINGLE RESPONSE DEGF
CROSS-SECTIONAL SHAPE STYLEROUND
OUTSIDE DIAMETER0.562 INCHES NOMINAL IN
OPERATING PRESSURE50.0 POUNDS PER SQUARE INCH (PSI) MAXIMUM SINGLE RESPONSE LBS
SPECIFICATION/STANDARD DATA81343-SAE J30 PROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD
NONDEFINITIVE SPEC/STD DATA6 SECTION
INSIDE DIAMETER0.312 INCHES NOMINAL IN
INSIDE SURFACE CONDITIONSMOOTH
SPECIAL FEATURESSAE STANDARD FOR "LOW-PRESSURE UNCOUPLED SYNTHETIC RUBBER COVERED HOSE"
MEDIA FOR WHICH DESIGNEDFUEL/OIL, HYDROCARBON SINGLE RESPONSE
SUBSTITUTES & CROSS-REFERENCES 4
J30R7-5Reference document
Same NSN cross-reference
Reference document — Design control — primary reference
J30Reference document
Same NSN cross-reference
Reference document — Secondary reference
SAE-J30Reference document
Same NSN cross-reference
Reference document — Design control — primary reference
30R7KV-LReference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Shelf-life managedNo demilitarization required
Ready to buy SAE 30R7-5?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is SAE 30R7-5?
SAE 30R7-5 is a HOSE,NONMETALLIC.
What parts can replace SAE 30R7-5?
There are 4 known substitutes for SAE 30R7-5: J30R7-5, J30, SAE-J30 and 1 more. Substitute compatibility should be verified for your specific system.
What is the NSN for SAE 30R7-5?
SAE 30R7-5 is cataloged in the U.S. Government catalog under NSN 4720-01-499-3769. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — SAE 30R7-5

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.