PartsTable
Technical Data Sheet
Download PDF

SAALC PD 385 — SAALC PD 385

✓ Government record, cited
— · MRO · MRO_GENERAL
PRODUCT OVERVIEW

SAALC PD 385: SAALC PD 385.

The SAALC PD 385 is a the manufacturer industrial component. Key specifications include display_type: LIGHT EMITTING DIODE (L.E.D.)., indicator_type: DIGITAL DISPLAY AND CATHODE RAY TUBE, frequency_rating: 60.0 HERTZ NOMINAL, installation_design: BENCH, operating_voltage_rating_in_volts: 115.0 AC MINIMUM AND 230.0 AC MAXIMUM. This part is cataloged in the U.S.

Government catalog under NSN 6625-01-060-7356, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MRO→ MRO_GENERAL→ SAALC PD 385
NSN: 6625-01-060-7356
FSC: 6625 — Electrical and Electronic Properties Measuring and Testing Instruments
CAGE: 98750 — SAN ANTONIO AIR LOGISTICS CENTER (USA)
SPECIFICATIONS
display_typeLIGHT EMITTING DIODE (L.E.D.).
indicator_typeDIGITAL DISPLAY AND CATHODE RAY TUBE
frequency_rating60.0 HERTZ NOMINAL
installation_designBENCH
display_digit_quantity3
operating_voltage_rating_in_volts115.0 AC MINIMUM AND 230.0 AC MAXIMUM
NSN6625-01-060-7356
COMPONENT DIAGRAM
COMPONENT MAIN IC EDGE CONNECTOR No detailed specs available SAALC PD 385 TITLE COMPONENT PN SAALC PD 385 MFR SAALC PD 385
KEY FEATURES
•
OPERATING VOLTAGE RATING IN VOLTS: 115.0 AC MINIMUM AND 230.0 AC MAXIMUM
•
INDICATOR TYPE: DIGITAL DISPLAY AND CATHODE RAY TUBE
•
DISPLAY DIGIT QUANTITY: 3
•
DISPLAY TYPE: LIGHT EMITTING DIODE (L.E.D.).
•
FREQUENCY RATING: 60.0 HERTZ NOMINAL
•
INSTALLATION DESIGN: BENCH
TECHNICAL CHARACTERISTICS
OPERATING VOLTAGE RATING IN VOLTS115.0 AC MINIMUM AND 230.0 AC MAXIMUM
INDICATOR TYPEDIGITAL DISPLAY AND CATHODE RAY TUBE
DISPLAY DIGIT QUANTITY3
DISPLAY TYPELIGHT EMITTING DIODE (L.E.D.).
SPECIAL FEATURESSPECRUM DISPLAY FREQ 1 KHZ TO 25 MHZ; 6 DECADE SELECTORS; LEVEL MEASURING RANGE M129 DBM TO P12 DBM; INTERNAL CALIBRATION, FRONT PANEL OUTPUTL 15 VDC; 50 MA FOR HIGH IMPEDANCE PROBE, CONTINUOUS MANUAL SWEEP MHz
FREQUENCY RATING60.0 HERTZ NOMINAL
INSTALLATION DESIGNBENCH
SUBSTITUTES & CROSS-REFERENCES 5
B50728Reference document
Same NSN cross-reference
Reference document — Secondary reference
A-A-50728AReference document
Same NSN cross-reference
Reference document — Identification reference
SAALC PD 385 CONFIG BReference document
Same NSN cross-reference
Reference document — Secondary reference
PD10WRGBGBEC25Reference document
Same NSN cross-reference
Reference document — Secondary reference
A-A-50728Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusCancelled· U.S. Government catalog
No demilitarization required
Ready to buy SAALC PD 385?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is SAALC PD 385?
SAALC PD 385 is a SAALC PD 385. It is classified as a MRO (MRO_GENERAL).
What parts can replace SAALC PD 385?
There are 5 known substitutes for SAALC PD 385: B50728, A-A-50728A, SAALC PD 385 CONFIG B and 2 more. Substitute compatibility should be verified for your specific system.
What is the NSN for SAALC PD 385?
SAALC PD 385 is cataloged in the U.S. Government catalog under NSN 6625-01-060-7356. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — SAALC PD 385