PartsTable
Technical Data Sheet
Download PDF

SA9035A11 — CAP,PROTECTIVE,DUST AND MOISTURE

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

SA9035A11: CAP,PROTECTIVE,DUST AND MOISTURE.

CAP,PROTECTIVE,DUST AND MOISTURE. Key specifications include material: ALUMINUM, design_type: FRICTION, overall_diameter: 5.000 INCHES NOMINAL IN, surface_treatment: ANODIZE, inside_diameter_length: 0.313 INCHES NOMINAL IN, round_cap_outside_surface_condition: SMOOTH. This part is cataloged in the U.S.

Government catalog under NSN 5340-00-609-6867, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
SA9035A11
NSN: 5340-00-609-6867
FSC: 5340 — Hardware, Commercial
CAGE: 09310 — SYLTONE INDUSTRIES LLC DBA GARDNER DENVER INC. DIV EMCO WHEATON (USA)
SPECIFICATIONS
materialALUMINUM
design_typeFRICTION
overall_diameter5.000 INCHES NOMINAL IN
surface_treatmentANODIZE
inside_diameter_length0.313 INCHES NOMINAL IN
round_cap_outside_surface_conditionSMOOTH
tube_outside_diameter_for_which_designed4.000 INCHES NOMINAL IN
NSN5340-00-609-6867
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: SA9035A11 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
DESIGN TYPE: FRICTION
•
OVERALL DIAMETER: 5.000 INCHES NOMINAL IN
•
TUBE OUTSIDE DIAMETER FOR WHICH DESIGNED: 4.000 INCHES NOMINAL IN
•
SURFACE TREATMENT: ANODIZE
•
MATERIAL: ALUMINUM
•
INSIDE DIAMETER LENGTH: 0.313 INCHES NOMINAL IN
•
ROUND CAP OUTSIDE SURFACE CONDITION: SMOOTH
TECHNICAL CHARACTERISTICS
DESIGN TYPEFRICTION
OVERALL DIAMETER5.000 INCHES NOMINAL IN
TUBE OUTSIDE DIAMETER FOR WHICH DESIGNED4.000 INCHES NOMINAL IN
SURFACE TREATMENTANODIZE
MATERIALALUMINUM
INSIDE DIAMETER LENGTH0.313 INCHES NOMINAL IN
ROUND CAP OUTSIDE SURFACE CONDITIONSMOOTH
SUBSTITUTES & CROSS-REFERENCES 1
490117Reference document
Same NSN cross-reference
Reference document — Design control — primary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy SA9035A11?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is SA9035A11?
SA9035A11 is a CAP,PROTECTIVE,DUST AND MOISTURE.
What parts can replace SA9035A11?
There is 1 known substitute for SA9035A11: 490117. Substitute compatibility should be verified for your specific system.
What is the NSN for SA9035A11?
SA9035A11 is cataloged in the U.S. Government catalog under NSN 5340-00-609-6867. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — SA9035A11