PartsTable
Technical Data Sheet
Download PDF

SA13156 — BEARING,ROLLER,NEEDLE

✓ Government record, cited
— · TAPERED BEARING
PRODUCT OVERVIEW

SA13156: BEARING,ROLLER,NEEDLE.

The BEARING,ROLLER,NEEDLE is a the manufacturer industrial component. Key specifications include material: STEEL ROLLER, bore_diameter: 0.1250 INCHES NOMINAL IN, overall_width: 0.1870 INCHES MAXIMUM IN, alignment_type: RIGID, surface_finish: GROUND, special_features: 50 PCT FULL OF SPECIFIED LUBRICANT. This part is cataloged in the U.S.

Government catalog under NSN 3110-01-039-0266, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
SA13156
NSN: 3110-01-039-0266
FSC: 3110 — Bearings, Antifriction, Unmounted
CAGE: 60380 — TIMKEN AEROSPACE, INC DBA TORRINGTON PRODUCT (USA)
SPECIFICATIONS
materialSTEEL ROLLER
bore_diameter0.1250 INCHES NOMINAL IN
overall_width0.1870 INCHES MAXIMUM IN
alignment_typeRIGID
surface_finishGROUND
special_features50 PCT FULL OF SPECIFIED LUBRICANT
style_designatorNON-SEPARABLE, WITH ROLLER RETAINER, OPEN END, DRAWN SHELL
lubrication_materialGREASE
overall_outside_diameter0.2500 INCHES NOMINAL IN
standard_tolerance_designationAFBMA STD TOLERANCE FOR INDUSTRIAL NEEDLE BEARINGS
lubrication_material_document_and_classificationMIL-G-23827 MIL SPEC SINGLE MATERIAL RESPONSE
NSN3110-01-039-0266
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: SA13156 · OEM ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
LUBRICATION MATERIAL: GREASE
•
SURFACE FINISH: GROUND
•
STYLE DESIGNATOR: NON-SEPARABLE, WITH ROLLER RETAINER, OPEN END, DRAWN SHELL
•
OVERALL OUTSIDE DIAMETER: 0.2500 INCHES NOMINAL IN
•
ALIGNMENT TYPE: RIGID
•
STANDARD TOLERANCE DESIGNATION: AFBMA STD TOLERANCE FOR INDUSTRIAL NEEDLE BEARINGS
TECHNICAL CHARACTERISTICS
LUBRICATION MATERIALGREASE
SURFACE FINISHGROUND
STYLE DESIGNATORNON-SEPARABLE, WITH ROLLER RETAINER, OPEN END, DRAWN SHELL
OVERALL WIDTH0.1870 INCHES MAXIMUM IN
OVERALL OUTSIDE DIAMETER0.2500 INCHES NOMINAL IN
ALIGNMENT TYPERIGID
SPECIAL FEATURES50 PCT FULL OF SPECIFIED LUBRICANT
STANDARD TOLERANCE DESIGNATIONAFBMA STD TOLERANCE FOR INDUSTRIAL NEEDLE BEARINGS
BORE DIAMETER0.1250 INCHES NOMINAL IN
MATERIALSTEEL SHELL
SUBSTITUTES & CROSS-REFERENCES 3
10107440Reference document
Same NSN cross-reference
Reference document — Informative reference only
JP-23-VReference document
Same NSN cross-reference
Reference document — Secondary reference
JP-23FVReference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required
Ready to buy SA13156?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is SA13156?
SA13156 is a BEARING,ROLLER,NEEDLE.
What parts can replace SA13156?
There are 3 known substitutes for SA13156: 10107440, JP-23-V, JP-23FV. Substitute compatibility should be verified for your specific system.
What is the NSN for SA13156?
SA13156 is cataloged in the U.S. Government catalog under NSN 3110-01-039-0266. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — SA13156