PartsTable
Technical Data Sheet
PartsTable / COMPONENT / SA13
SA13 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

RESISTOR,FIXED,WIRE WOUND,INDUCT. Key specifications include height: 0.156 INCHES NOMINAL IN, material: STEEL, body_style: BUSHING MOUNT, body_width: 0.641 INCHES MAXIMUM IN, body_length: 1.157 INCHES MAXIMUM IN, seat_radius: UNABLE TO DECODE. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-276-5829, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
SA13
NSN: 5340-00-276-5829
FSC: 5340
CAGE: 66289 — WISCONSIN MOTORS, LLC (USA)
SPECIFICATIONS
height0.156 INCHES NOMINAL IN
materialSTEEL
body_styleBUSHING MOUNT
body_width0.641 INCHES MAXIMUM IN
body_length1.157 INCHES MAXIMUM IN
seat_radiusUNABLE TO DECODE
thread_class2A A
overall_width0.641 INCHES MAXIMUM IN
actuator_styleROUND
bushing_length0.470 INCHES NOMINAL IN
furnished_dataACTIVE INGREDIENT PRESENCE AND EXCESS MOISTURE CONTENT
inclosure_typeFULLY INCLOSED
NSN5340-00-276-5829
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: SA13 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
STYLE DESIGNATOR: CUP
•
HEIGHT: 0.156 INCHES NOMINAL IN
•
OUTSIDE DIAMETER: 0.750 INCHES NOMINAL IN
•
MATERIAL THICKNESS: 0.062 INCHES NOMINAL IN
•
SURFACE TREATMENT: CADMIUM
•
MATERIAL: STEEL
TECHNICAL CHARACTERISTICS (FLIS)
STYLE DESIGNATORCUP
HEIGHT0.156 INCHES NOMINAL IN
OUTSIDE DIAMETER0.750 INCHES NOMINAL IN
MATERIAL THICKNESS0.062 INCHES NOMINAL IN
SURFACE TREATMENTCADMIUM
MATERIALSTEEL
VERIFIED SUBSTITUTES & CROSS-REFERENCES 18
1310 6000 17Upgraded Successor
successor cross-reference
successor
34CUpgraded Successor
successor cross-reference
successor
200151MPC21.3Interchangeable
interchangeable cross-reference
interchangeable
D164717Interchangeable
interchangeable cross-reference
interchangeable
GGG-V-410Interchangeable
interchangeable cross-reference
interchangeable
GGG-V-410 TY4Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy SA13?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is SA13?
SA13 is a RESISTOR,FIXED,WIRE WOUND,INDUCT.
What parts can replace SA13?
There are 18 known substitutes for SA13: 1310 6000 17, 34C, 200151MPC21.3 and 15 more. Substitute compatibility should be verified for your specific system.
Is SA13 still available?
SA13 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — SA13

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026