PartsTable
Technical Data Sheet
Download PDF

SA1195 — RESISTOR,VARIABLE,WIRE WOUND,PRE

✓ Government record, cited
— · MRO · MRO_GENERAL
PRODUCT OVERVIEW

SA1195: RESISTOR,VARIABLE,WIRE WOUND,PRE.

RESISTOR,VARIABLE,WIRE WOUND,PRE. Key specifications include duty_type: CONTINUOUS, body_style: CYLINDRICAL FRAMECYLINDRICAL FRAME, body_length: 2.000 INCHES MAXIMUM IN, shaft_style: ROUND, SLOTTED, bearing_type: SLEEVE SHAFT, shaft_length: 0.812 INCHES NOMINAL IN. This part is cataloged in the U.S.

Government catalog under NSN 5905-00-295-3754, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MRO→ MRO_GENERAL→ SA1195
NSN: 5905-00-295-3754
NIINs: 002953754, 004723403
FSC: 5905 — Resistor
CAGE: 73138 — BI TECHNOLOGIES CORPORATION DIV BI TECHNOLOGIES CORP. (USA)
SPECIFICATIONS
duty_typeCONTINUOUS
body_styleCYLINDRICAL FRAMECYLINDRICAL FRAME
body_length2.000 INCHES MAXIMUM IN
shaft_styleROUND, SLOTTED
bearing_typeSLEEVE SHAFT
shaft_length0.812 INCHES NOMINAL IN
shaft_runout0.002 INCHES IN
thread_class2B POWER TAKEOFF FACILITY HOLE
actuator_typeSINGLE SHAFT
body_diameter0.390 INCHES MAXIMUM0.390 INCHES MAXIMUM IN
current_rating60.0 MILLIAMPERES NOMINAL
inclosure_typeFULLY INCLOSEDFULLY INCLOSED
NSN5905-00-295-3754
COMPONENT DIAGRAM
COMPONENT MAIN IC EDGE CONNECTOR No detailed specs available RESISTOR,VARIABLE,WIRE WOUND,PRE TITLE COMPONENT PN SA1195 MFR RESISTOR,VARIABLE,WIRE
KEY FEATURES
•
MAXIMUM RUNNING TORQUE: 1.50 INCH-OUNCES IN
•
NONTURN DEVICE LOCATION: AT 12 OCLOCK
•
BODY DIAMETER: 1.812 INCHES NOMINAL IN
•
SCREW THREAD QUANTITY PER INCH: 32.0
•
LATERAL RUNOUT: 0.005 INCHES IN
•
ELECTRICAL RESISTANCE PER SECTION: 20.0 KILOHMS SINGLE SECTION
•
AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER: 125.0 SINGLE SECTION
•
SECTION QUANTITY: 1
TECHNICAL CHARACTERISTICS
MAXIMUM RUNNING TORQUE1.50 INCH-OUNCES IN
NONTURN DEVICE LOCATIONAT 12 OCLOCK
BODY DIAMETER1.812 INCHES NOMINAL IN
SCREW THREAD QUANTITY PER INCH32.0
LATERAL RUNOUT0.005 INCHES IN
ELECTRICAL RESISTANCE PER SECTION20.0 KILOHMS SINGLE SECTION
AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER125.0 SINGLE SECTION
SECTION QUANTITY1
SHAFT DIAMETER0.250 INCHES NOMINAL IN
NONTURN DEVICE RADIUS0.562 INCHES NOMINAL IN
SUBSTITUTES & CROSS-REFERENCES 2
SM-B-120063-4Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
SMB120063P4Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Semi-active item — no replacement plannedNo demilitarization required
Ready to buy SA1195?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is SA1195?
SA1195 is a RESISTOR,VARIABLE,WIRE WOUND,PRE. It is classified as a MRO (MRO_GENERAL).
What parts can replace SA1195?
There are 2 known substitutes for SA1195: SM-B-120063-4, SMB120063P4. Substitute compatibility should be verified for your specific system.
What is the NSN for SA1195?
SA1195 is cataloged in the U.S. Government catalog under NSN 5905-00-295-3754. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — SA1195

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.