PartsTable
Technical Data Sheet
PartsTable / COMPONENT / SA11207
SA11207 ✓ Verified by PartsTable
— · TAPERED BEARING
WHAT YOU NEED TO KNOW
Cup and cone sold separately — confirm both needed Timken series numbers indicate dimensions
Cup and cone NOT sold as set — verify order
PRODUCT OVERVIEW

The BEARING,ROLLER,NEEDLE is a the manufacturer industrial component. Key specifications include material: STEEL OVERALL, bore_diameter: 0.3123 INCHES MINIMUM AND 0.3126 INCHES MAXIMUM IN, overall_width: 0.3650 INCHES MINIMUM AND 0.3750 INCHES MAXIMUM IN, alignment_type: RIGID, surface_finish: GROUND, style_designator: NON-SEPARABLE, OPEN END, DRAWN SHELL. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-110-9392, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
SA11207
NSN: 3110-00-110-9392
FSC: 3110
CAGE: 72121 — EATON MOTOR SITE (USA)
SPECIFICATIONS
materialSTEEL OVERALL
bore_diameter0.3123 INCHES MINIMUM AND 0.3126 INCHES MAXIMUM IN
overall_width0.3650 INCHES MINIMUM AND 0.3750 INCHES MAXIMUM IN
alignment_typeRIGID
surface_finishGROUND
style_designatorNON-SEPARABLE, OPEN END, DRAWN SHELL
overall_outside_diameter0.4947 INCHES MINIMUM AND 0.4950 INCHES MAXIMUM IN
NSN3110-00-110-9392
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: SA11207 · OEM ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
ALIGNMENT TYPE: RIGID
•
OVERALL OUTSIDE DIAMETER: 0.4947 INCHES MINIMUM AND 0.4950 INCHES MAXIMUM IN
•
MATERIAL: STEEL OVERALL
•
BORE DIAMETER: 0.3123 INCHES MINIMUM AND 0.3126 INCHES MAXIMUM IN
•
SURFACE FINISH: GROUND
•
STYLE DESIGNATOR: NON-SEPARABLE, OPEN END, DRAWN SHELL
TECHNICAL CHARACTERISTICS (FLIS)
ALIGNMENT TYPERIGID
OVERALL WIDTH0.3650 INCHES MINIMUM AND 0.3750 INCHES MAXIMUM IN
OVERALL OUTSIDE DIAMETER0.4947 INCHES MINIMUM AND 0.4950 INCHES MAXIMUM IN
MATERIALSTEEL OVERALL
BORE DIAMETER0.3123 INCHES MINIMUM AND 0.3126 INCHES MAXIMUM IN
SURFACE FINISHGROUND
STYLE DESIGNATORNON-SEPARABLE, OPEN END, DRAWN SHELL
VERIFIED SUBSTITUTES & CROSS-REFERENCES 3
BP56Interchangeable
interchangeable cross-reference
interchangeable
B56Interchangeable
interchangeable cross-reference
interchangeable
GB56Interchangeable
Same NIIN cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy SA11207?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is SA11207?
SA11207 is a BEARING,ROLLER,NEEDLE.
What parts can replace SA11207?
There are 3 known substitutes for SA11207: BP56, B56, GB56. Substitute compatibility should be verified for your specific system.
What is the NSN for SA11207?
SA11207 is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-110-9392. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — SA11207

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026