PartsTable
Technical Data Sheet
SA-40 ✓ Verified by PartsTable
· SFP TRANSCEIVER
WHAT YOU NEED TO KNOW
SR = Short Range (multimode, 300m) | LR = Long Range (single-mode, 10km) DOM = Digital Optical Monitoring — most enterprise SFPs support it
MATCH ALL THREE: Speed + Wavelength + Brand compatibility
PRODUCT OVERVIEW

RECTIFIER,SEMICONDUCTOR DEVICE,U. Key specifications include radius: 0.875 INCHES NOMINAL IN, diameter: 1.500 INCHES NOMINAL IN, material: STEEL, cut_length: 2.000 INCHES NOMINAL IN, shank_type: WELDON, design_form: SINGLE END. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5961-00-097-7595, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
SA-40
NSN: 5961-00-097-7595
FSC: 5961
CAGE: 14099 — SEMTECH CORPORATION (USA)
SPECIFICATIONS
radius0.875 INCHES NOMINAL IN
diameter1.500 INCHES NOMINAL IN
materialSTEEL
cut_length2.000 INCHES NOMINAL IN
shank_typeWELDON
design_formSINGLE END
design_typeLIMITED
flute_designHELICAL
body_diameter9.125 INCHES NOMINAL IN
overall_width0.250 INCHES NOMINAL IN
flute_quantity6
overall_height0.700 INCHES NOMINAL IN
NSN5961-00-097-7595
COMPONENT DIAGRAM
BAIL LATCH 10G SFP+ 850nm · SR (MMF, 300m) DOM: Digital Optical Monitoring TX RX LC DUPLEX 20-PIN EDGE CONNECTOR ~56.5 mm ~13.4mm SFP+ TRANSCEIVER | 10G | 850nm | SR (MMF, 300m) Hot-swappable | LC duplex fiber | DDM/DOM supported TITLE SFP+ XCVR PN SA-40 MFR OEM RECTIFIER,SEMICONDUCTOR DEVICE,U
KEY FEATURES
TERMINAL TYPE AND QUANTITY: 8 INSULATED WIRE LEAD
MOUNTING METHOD: UNTHREADED HOLE(S)
ABSOLUTE MAXIMUM VOLTAGE RATING IN VOLTS PER CHARACTERISTIC: 2500.0 REVERSE VOLTAGE, DC
ABSOLUTE MAXIMUM CURRENT RATING PER CHARACTERISTIC: 200.00 MILLIAMPERES AVERAGE FORWARD CURRENT AVERAGED OVER A FULL 60-HZ CYCLE
MATERIAL: SILICON
OPERATING TEMP RANGE: -65.0 TO 130.0 CELSIUS DEGC
TECHNICAL CHARACTERISTICS (FLIS)
OVERALL HEIGHT0.700 INCHES NOMINAL IN
TERMINAL TYPE AND QUANTITY8 INSULATED WIRE LEAD
MOUNTING METHODUNTHREADED HOLE(S)
ABSOLUTE MAXIMUM VOLTAGE RATING IN VOLTS PER CHARACTERISTIC2500.0 REVERSE VOLTAGE, DC
ABSOLUTE MAXIMUM CURRENT RATING PER CHARACTERISTIC200.00 MILLIAMPERES AVERAGE FORWARD CURRENT AVERAGED OVER A FULL 60-HZ CYCLE
MATERIALSILICON
OVERALL LENGTH2.130 INCHES NOMINAL IN
OPERATING TEMP RANGE-65.0 TO 130.0 CELSIUS DEGC
CIRCUIT CONNECTION STYLE DESIGNATORBRIDGE 1 PHASE
OVERALL WIDTH0.250 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 13
14578AInterchangeable
interchangeable cross-reference
interchangeable
27080HInterchangeable
interchangeable cross-reference
interchangeable
AFP34Interchangeable
interchangeable cross-reference
interchangeable
ARP5DInterchangeable
interchangeable cross-reference
interchangeable
DT272Interchangeable
interchangeable cross-reference
interchangeable
F-514Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99ESD SensitiveNot HAZMAT
Ready to buy SA-40?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is SA-40?
SA-40 is a RECTIFIER,SEMICONDUCTOR DEVICE,U.
What parts can replace SA-40?
There are 13 known substitutes for SA-40: 14578A, 27080H, AFP34 and 10 more. Substitute compatibility should be verified for your specific system.
What is the NSN for SA-40?
SA-40 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5961-00-097-7595. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — SA-40