PartsTable
Technical Data Sheet
Download PDF

SA-1596D — RESISTOR,VARIABLE,WIRE WOUND,PRE

✓ Government record, cited
— · MRO · MRO_GENERAL
PRODUCT OVERVIEW

SA-1596D: RESISTOR,VARIABLE,WIRE WOUND,PRE.

RESISTOR,VARIABLE,WIRE WOUND,PRE. Key specifications include body_style: CYLINDRICAL BUSHING MOUNTED, body_length: 4.234 INCHES MAXIMUM IN, shaft_style: ROUND, bearing_type: SLEEVE SHAFT, shaft_length: 0.812 INCHES NOMINAL IN, actuator_type: SINGLE SHAFT. This part is cataloged in the U.S.

Government catalog under NSN 5905-00-665-9256, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MRO→ MRO_GENERAL→ SA-1596D
NSN: 5905-00-665-9256
FSC: 5905 — Resistor
CAGE: 73138 — BI TECHNOLOGIES CORPORATION DIV BI TECHNOLOGIES CORP. (USA)
SPECIFICATIONS
body_styleCYLINDRICAL BUSHING MOUNTED
body_length4.234 INCHES MAXIMUM IN
shaft_styleROUND
bearing_typeSLEEVE SHAFT
shaft_length0.812 INCHES NOMINAL IN
actuator_typeSINGLE SHAFT
body_diameter1.828 INCHES MAXIMUM IN
shaft_diameter0.250 INCHES NOMINAL IN
mounting_methodSTANDARD BUSHING
section_quantity2
terminal_locationRADIALLY POSITIONED OVER LESS THAN HALF THE CIRCUMFERENCE LOCATION NOT OTHERWISE SPECIFIED
nonturn_device_radius0.562 INCHES NOMINAL IN
NSN5905-00-665-9256
COMPONENT DIAGRAM
COMPONENT MAIN IC EDGE CONNECTOR No detailed specs available RESISTOR,VARIABLE,WIRE WOUND,PRE TITLE COMPONENT PN SA-1596D MFR RESISTOR,VARIABLE,WIRE
KEY FEATURES
•
MAXIMUM RUNNING TORQUE: 1.50 INCH-OUNCES IN
•
NONTURN DEVICE LOCATION: AT 12 OCLOCK
•
BODY DIAMETER: 1.828 INCHES MAXIMUM IN
•
SCREW THREAD QUANTITY PER INCH: 32.0
•
ELECTRICAL RESISTANCE PER SECTION: 10.000 KILOHMS 1ST SECTION AND 100.000 KILOHMS 2ND SECTION
•
AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER: 80.0 ALL SECTIONS
•
SECTION QUANTITY: 2
•
SHAFT DIAMETER: 0.250 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS
MAXIMUM RUNNING TORQUE1.50 INCH-OUNCES IN
NONTURN DEVICE LOCATIONAT 12 OCLOCK
BODY DIAMETER1.828 INCHES MAXIMUM IN
SCREW THREAD QUANTITY PER INCH32.0
ELECTRICAL RESISTANCE PER SECTION10.000 KILOHMS 1ST SECTION AND 100.000 KILOHMS 2ND SECTION
AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER80.0 ALL SECTIONS
SECTION QUANTITY2
SHAFT DIAMETER0.250 INCHES NOMINAL IN
NONTURN DEVICE RADIUS0.562 INCHES NOMINAL IN
FUNCTION CHARACTERISTIC PER SECTIONALL SECTIONS LINEAR
SUBSTITUTES & CROSS-REFERENCES 1
247205Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusCancelled· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy SA-1596D?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is SA-1596D?
SA-1596D is a RESISTOR,VARIABLE,WIRE WOUND,PRE. It is classified as a MRO (MRO_GENERAL).
What parts can replace SA-1596D?
There is 1 known substitute for SA-1596D: 247205. Substitute compatibility should be verified for your specific system.
What is the NSN for SA-1596D?
SA-1596D is cataloged in the U.S. Government catalog under NSN 5905-00-665-9256. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — SA-1596D

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.