PartsTable
Technical Data Sheet
Download PDF

S9714A-Z5E056AP — GEAR,ANTIBACKLASH,SPUR

✓ Government record, cited
— · COMPONENT
PRODUCT OVERVIEW

S9714A-Z5E056AP: GEAR,ANTIBACKLASH,SPUR.

The GEAR,ANTIBACKLASH,SPUR is a the manufacturer industrial component. Key specifications include material: STEEL SPRING, bore_style: PLAIN BOTH ENDS, tooth_form: STANDARD, pitch_diameter: 0.8750 INCHES NOMINAL IN, pressure_angle: 20.0000 DEGREES, teeth_quantity: 56. This part is cataloged in the U.S.

Government catalog under NSN 3020-01-231-7131, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
S9714A-Z5E056AP
NSN: 3020-01-231-7131
FSC: 3020 — Gears, Pulleys, Sprockets, and Transmission Chain
CAGE: 00328 — DESIGNATRONICS INCORPORATED DIV STERLING INSTRUMENTS DIV (USA)
SPECIFICATIONS
materialSTEEL SPRING
bore_stylePLAIN BOTH ENDS
tooth_formSTANDARD
pitch_diameter0.8750 INCHES NOMINAL IN
pressure_angle20.0000 DEGREES
teeth_quantity56
style_designatorPROTRUDING HUB
surface_treatmentANODIZE BODY
face_nominal_width0.104 INCHES IN
hub_nominal_diameter0.250 INCHES FIRST END IN
hub_style_designatorSPLIT FIRST END
bore_nominal_diameter0.187 INCHES BOTH ENDS IN
NSN3020-01-231-7131
COMPONENT DIAGRAM
COMPONENT MAIN IC EDGE CONNECTOR No detailed specs available GEAR,ANTIBACKLASH,SPUR TITLE COMPONENT PN S9714A-Z5E056AP MFR GEAR,ANTIBACKLASH,SPUR
KEY FEATURES
•
BORE NOMINAL DIAMETER: 0.187 INCHES BOTH ENDS IN
•
HUB NOMINAL DIAMETER: 0.250 INCHES FIRST END IN
•
TEETH QUANTITY: 56
•
CLAMPING SURFACE NOMINAL LENGTH: 0.221 INCHES FIRST END IN
•
BORE STYLE: PLAIN BOTH ENDS
•
NOMINAL DISTANCE BETWEEN BODY FACE AND PROTRUDING HUB END: 0.221 INCHES FIRST END IN
•
STYLE DESIGNATOR: PROTRUDING HUB
•
PITCH DIAMETER: 0.8750 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS
BORE NOMINAL DIAMETER0.187 INCHES BOTH ENDS IN
HUB NOMINAL DIAMETER0.250 INCHES FIRST END IN
TEETH QUANTITY56
CLAMPING SURFACE NOMINAL LENGTH0.221 INCHES FIRST END IN
BORE STYLEPLAIN BOTH ENDS
NOMINAL DISTANCE BETWEEN BODY FACE AND PROTRUDING HUB END0.221 INCHES FIRST END IN
STYLE DESIGNATORPROTRUDING HUB
PITCH DIAMETER0.8750 INCHES NOMINAL IN
TOOTH FORMSTANDARD
HUB STYLE DESIGNATORSPLIT FIRST END
SUBSTITUTES & CROSS-REFERENCES 2
S9714A-Z5E-56-AReference document
Same NSN cross-reference
Reference document — Secondary reference
350451Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy S9714A-Z5E056AP?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is S9714A-Z5E056AP?
S9714A-Z5E056AP is a GEAR,ANTIBACKLASH,SPUR.
What parts can replace S9714A-Z5E056AP?
There are 2 known substitutes for S9714A-Z5E056AP: S9714A-Z5E-56-A, 350451. Substitute compatibility should be verified for your specific system.
What is the NSN for S9714A-Z5E056AP?
S9714A-Z5E056AP is cataloged in the U.S. Government catalog under NSN 3020-01-231-7131. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — S9714A-Z5E056AP