Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW
The RETAINER,PACKING is a the manufacturer industrial component. Key specifications include angle: 29.0 DEGREES MINIMUM AND 31.0 DEGREES MAXIMUM, material: ALUMINUM ALLOY 2017 OR ALUMINUM ALLOY 2024 OVERALL, surface_treatment: CADMIUM OVERALL, peripheral_diameter: 1.046 INCHES MINIMUM AND 1.052 INCHES MAXIMUM IN, center_hole_diameter: 0.756 INCHES MINIMUM AND 0.776 INCHES MAXIMUM IN, cross-sectional_height: 0.120 INCHES MINIMUM AND 0.130 INCHES MAXIMUM IN. This product is currently in active production with full OEM support.
This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-514-4459, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.
Verify compatibility with your specific system configuration before ordering.
WHERE IT FITS
S970-67
NSN:5330-00-514-4459 FSC:5330 CAGE:93591 — PENTAIR VALVES & CONTROLS US LP DIV FLOW CONTROL US HOLDING CORP (USA)
SPECIFICATIONS
angle
29.0 DEGREES MINIMUM AND 31.0 DEGREES MAXIMUM
material
ALUMINUM ALLOY 2017 OR ALUMINUM ALLOY 2024 OVERALL
surface_treatment
CADMIUM OVERALL
peripheral_diameter
1.046 INCHES MINIMUM AND 1.052 INCHES MAXIMUM IN
center_hole_diameter
0.756 INCHES MINIMUM AND 0.776 INCHES MAXIMUM IN
cross-sectional_height
0.120 INCHES MINIMUM AND 0.130 INCHES MAXIMUM IN
cross-sectional_shape_style
CUP
material_document_and_classification
QQ-A-225/5 ALLOY 2017 FED SPEC 1ST MATERIAL RESPONSE OR QQ-A-225/6 ALLOY 2024 FED SPEC 2ND MATERIAL RESPONSE OVERALL
NSN
5330-00-514-4459
COMPONENT DIAGRAM
KEY FEATURES
•
CENTER HOLE DIAMETER: 0.756 INCHES MINIMUM AND 0.776 INCHES MAXIMUM IN
•
MATERIAL DOCUMENT AND CLASSIFICATION: QQ-A-225/5 ALLOY 2017 FED SPEC 1ST MATERIAL RESPONSE OR QQ-A-225/6 ALLOY 2024 FED SPEC 2ND MATERIAL RESPONSE OVERALL
•
SURFACE TREATMENT: CADMIUM OVERALL
•
PERIPHERAL DIAMETER: 1.046 INCHES MINIMUM AND 1.052 INCHES MAXIMUM IN
•
CROSS-SECTIONAL SHAPE STYLE: CUP
•
ANGLE: 29.0 DEGREES MINIMUM AND 31.0 DEGREES MAXIMUM
•
CROSS-SECTIONAL HEIGHT: 0.120 INCHES MINIMUM AND 0.130 INCHES MAXIMUM IN
•
MATERIAL: ALUMINUM ALLOY 2017 OR ALUMINUM ALLOY 2024 OVERALL
TECHNICAL CHARACTERISTICS (FLIS)
CENTER HOLE DIAMETER
0.756 INCHES MINIMUM AND 0.776 INCHES MAXIMUM IN
MATERIAL DOCUMENT AND CLASSIFICATION
QQ-A-225/5 ALLOY 2017 FED SPEC 1ST MATERIAL RESPONSE OR QQ-A-225/6 ALLOY 2024 FED SPEC 2ND MATERIAL RESPONSE OVERALL
SURFACE TREATMENT
CADMIUM OVERALL
PERIPHERAL DIAMETER
1.046 INCHES MINIMUM AND 1.052 INCHES MAXIMUM IN
CROSS-SECTIONAL SHAPE STYLE
CUP
ANGLE
29.0 DEGREES MINIMUM AND 31.0 DEGREES MAXIMUM
CROSS-SECTIONAL HEIGHT
0.120 INCHES MINIMUM AND 0.130 INCHES MAXIMUM IN
MATERIAL
ALUMINUM ALLOY 2017 OR ALUMINUM ALLOY 2024 OVERALL
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is S970-67?
S970-67 is a RETAINER,PACKING.
What parts can replace S970-67?
There are 14 known substitutes for S970-67: 6372-11, 6372, MIL-F-2692 and 11 more. Substitute compatibility should be verified for your specific system.
What is the NSN for S970-67?
S970-67 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-514-4459. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.