PartsTable
Technical Data Sheet
PartsTable / O-RING / S9515-AL-MMA-010,7-60 ITEM11
S9515-AL-MMA-010,7-60 ITEM11 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The S9515-AL-MMA-010,7-60 ITEM11 is a the manufacturer industrial component. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5331-00-935-9203, indicating validated use in U.S. government and defense logistics supply chains.

Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
S9515-AL-MMA-010,7-60 ITEM11
NSN: 5331-00-935-9203
FSC: 5331 — O-RING
CAGE: 53711 — NAVAL SEA SYSTEMS COMMAND (USA)
SPECIFICATIONS
Part NumberS9515-AL-MMA-010,7-60 ITEM11
NSN5331-00-935-9203
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: S9515-AL-MMA-010,7-60 ITEM11 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CENTER HOLE DIAMETER: 0.915 INCHES MINIMUM AND 0.933 INCHES MAXIMUM IN
•
CROSS-SECTIONAL HEIGHT: 0.112 INCHES MINIMUM AND 0.120 INCHES MAXIMUM IN
•
MATERIAL: RUBBER ETHYLENE-PROPYLENE CLASS EPM
TECHNICAL CHARACTERISTICS (FLIS)
CENTER HOLE DIAMETER0.915 INCHES MINIMUM AND 0.933 INCHES MAXIMUM IN
CROSS-SECTIONAL HEIGHT0.112 INCHES MINIMUM AND 0.120 INCHES MAXIMUM IN
MATERIALRUBBER ETHYLENE-PROPYLENE CLASS EPM
VERIFIED SUBSTITUTES & CROSS-REFERENCES 26
1385789 ITEM 24Interchangeable
interchangeable cross-reference
interchangeable
700-912-355Interchangeable
interchangeable cross-reference
interchangeable
AS568-912MILP25732Interchangeable
interchangeable cross-reference
interchangeable
AS568-912Interchangeable
interchangeable cross-reference
interchangeable
203424Interchangeable
interchangeable cross-reference
interchangeable
AA1373-912Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy S9515-AL-MMA-010,7-60 ITEM11?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is S9515-AL-MMA-010,7-60 ITEM11?
S9515-AL-MMA-010,7-60 ITEM11 is a S9515-AL-MMA-010,7-60 ITEM11.
What parts can replace S9515-AL-MMA-010,7-60 ITEM11?
There are 26 known substitutes for S9515-AL-MMA-010,7-60 ITEM11: 1385789 ITEM 24, 700-912-355, AS568-912MILP25732 and 23 more. Substitute compatibility should be verified for your specific system.
Is S9515-AL-MMA-010,7-60 ITEM11 still available?
S9515-AL-MMA-010,7-60 ITEM11 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — S9515-AL-MMA-010,7-60 ITEM11

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026