PartsTable
Technical Data Sheet
PartsTable / O-RING / S9515-AL-MMA-010,7-41 ITEM4

S9515-AL-MMA-010,7-41 ITEM4 — Technical Data Sheet

✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The O-RING is a the manufacturer industrial component. Key specifications include material: RUBBER ETHYLENE-PROPYLENE CLASS EPM, center_hole_diameter: 0.915 INCHES MINIMUM AND 0.933 INCHES MAXIMUM IN, cross-sectional_height: 0.112 INCHES MINIMUM AND 0.120 INCHES MAXIMUM IN. This part is cataloged in the Federal Logistics Information System under NSN 5331-00-935-9203, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
S9515-AL-MMA-010,7-41 ITEM4
NSN: 5331-00-935-9203
FSC: 5331 — O-RING
CAGE: 53711 — NAVAL SEA SYSTEMS COMMAND (USA)
SPECIFICATIONS
materialRUBBER ETHYLENE-PROPYLENE CLASS EPM
center_hole_diameter0.915 INCHES MINIMUM AND 0.933 INCHES MAXIMUM IN
cross-sectional_height0.112 INCHES MINIMUM AND 0.120 INCHES MAXIMUM IN
NSN5331-00-935-9203
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: S9515-AL-MMA-010,7-41 ITEM4 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CENTER HOLE DIAMETER: 0.915 INCHES MINIMUM AND 0.933 INCHES MAXIMUM IN
•
CROSS-SECTIONAL HEIGHT: 0.112 INCHES MINIMUM AND 0.120 INCHES MAXIMUM IN
•
MATERIAL: RUBBER ETHYLENE-PROPYLENE CLASS EPM
TECHNICAL CHARACTERISTICS
CENTER HOLE DIAMETER0.915 INCHES MINIMUM AND 0.933 INCHES MAXIMUM IN
CROSS-SECTIONAL HEIGHT0.112 INCHES MINIMUM AND 0.120 INCHES MAXIMUM IN
MATERIALRUBBER ETHYLENE-PROPYLENE CLASS EPM
VERIFIED SUBSTITUTES & CROSS-REFERENCES 29
1385789 ITEM 24InterchangeableGOVERNMENT REGISTRY
interchangeable cross-reference
interchangeable
700-912-355InterchangeableGOVERNMENT REGISTRY
interchangeable cross-reference
interchangeable
AS568-912MILP25732InterchangeableGOVERNMENT REGISTRY
interchangeable cross-reference
interchangeable
AS568-912InterchangeableGOVERNMENT REGISTRY
interchangeable cross-reference
interchangeable
203424InterchangeableGOVERNMENT REGISTRY
interchangeable cross-reference
interchangeable
AA1373-912InterchangeableGOVERNMENT REGISTRY
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusCANCELLEDGOVERNMENT REGISTRY
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy S9515-AL-MMA-010,7-41 ITEM4?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is S9515-AL-MMA-010,7-41 ITEM4?
S9515-AL-MMA-010,7-41 ITEM4 is a O-RING.
What parts can replace S9515-AL-MMA-010,7-41 ITEM4?
There are 29 known substitutes for S9515-AL-MMA-010,7-41 ITEM4: 1385789 ITEM 24, 700-912-355, AS568-912MILP25732 and 26 more. Substitute compatibility should be verified for your specific system.
Is S9515-AL-MMA-010,7-41 ITEM4 still available?
S9515-AL-MMA-010,7-41 ITEM4 is currently cancelled.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — S9515-AL-MMA-010,7-41 ITEM4

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: September 2026